How to Easily Regrip Golf Clubs in 5 Minutes

AvatarByMatthew Woods How To Guides

How to Put On New Golf Club Grips

Golf is a game of precision, and having the right equipment can make a big difference in your performance. One of the most important pieces of equipment is your golf club grips. Worn-out or damaged grips can make it difficult to control your swing, leading to errant shots and lost strokes.

If you’re looking to improve your game, it’s a good idea to replace your golf club grips every few years. Fortunately, putting on new golf club grips is a relatively simple task that you can do yourself at home.

In this article, we’ll walk you through the process of putting on new golf club grips, step-by-step. We’ll also provide tips on choosing the right grips for your clubs and maintaining them for peak performance.

So whether you’re a seasoned golfer or a beginner, read on for all the information you need to know about putting on new golf club grips!

Step Instructions Image
1 Remove the old grip
2 Clean the club shaft
3 Apply grip solvent
4 Slide on the new grip
5 Tighten the grip

Golf club grips are an important part of your golf game. They provide you with the necessary traction to swing the club properly and generate power. Over time, golf grips can become worn and slippery, which can lead to a loss of control and accuracy. Replacing your golf grips is a relatively simple task that can be completed in a matter of minutes. In this guide, we will walk you through the process of putting on new golf club grips.

Tools and Materials Needed

  • Golf club grips
  • Golf grip solvent
  • Rags
  • Tape measure
  • Golf club cleaner
  • Golf club head covers

Steps to Remove Old Grips

1. Start by removing the old grip from the club head. To do this, you will need to use a golf grip solvent. Golf grip solvent is a chemical that helps to loosen the adhesive that holds the grip to the club shaft. Apply the solvent to the grip and let it sit for a few minutes.
2. Once the solvent has had time to work, you can begin to remove the grip. Start by peeling back the edge of the grip. You may need to use a utility knife or a screwdriver to help you get started. Once you have started to peel back the edge of the grip, you can continue to work your way around the club head until the entire grip is removed.
3. Be careful not to damage the club head while you are removing the grip. If you are having trouble removing the grip, you can try using a heat gun to soften the adhesive.

Steps to Apply New Grips

1. Before you apply the new grip, you will need to clean the club head. This will help to ensure that the new grip will adhere properly. To clean the club head, you can use a golf club cleaner or a mild detergent and water.
2. Once the club head is clean, you can apply the solvent to the club shaft. This will help to loosen the adhesive on the new grip and make it easier to slide the grip onto the shaft.
3. Slide the new grip onto the club shaft. Be sure to align the grip so that the logo is facing the correct direction.
4. Rotate the grip until it is centered on the club shaft. You can use a tape measure to help you center the grip.
5. Tape the grip in place. This will help to keep the grip from slipping while you are playing golf.

Putting on new golf club grips is a relatively simple task that can be completed in a matter of minutes. By following these steps, you can ensure that your golf grips are properly installed and that you are able to get the most out of your golf game.

Here are some additional tips for putting on new golf club grips:

  • Use a golf grip installation tool to help you apply the new grip. This tool will make it easier to slide the grip onto the shaft and to center the grip.
  • Be sure to use the correct type of solvent for your golf grips. Some solvents are designed for specific types of grips, so be sure to read the label before you purchase a solvent.
  • If you are having trouble applying the new grip, you can try using a heat gun to soften the adhesive. Be careful not to use too much heat, as this could damage the grip.
  • Once the new grip is installed, be sure to play a few rounds of golf to break in the grip. This will help to ensure that the grip is properly adhered to the club shaft and that it provides you with the necessary traction.

3. Steps to Put On New Grips

1. Choose the right size grip for your clubs.

The most important step in putting on new golf club grips is choosing the right size. If the grip is too small, it will be uncomfortable to hold and you will lose power on your swing. If the grip is too large, it will be difficult to control and you will have trouble making solid contact with the ball.

To find the right size grip, you will need to measure the diameter of your club shaft. You can do this with a tape measure or a grip size chart. Once you have the measurement, you can compare it to the grip size chart to find the right size grip for your clubs.

2. Prepare the grips by sanding them.

Before you can put on new golf club grips, you will need to prepare the old grips by sanding them. This will help to remove any dirt, grime, or old adhesive that may be on the shaft. You can use a sanding block or a piece of sandpaper to sand the grips. Be sure to sand in the direction of the grain of the shaft.

3. Apply solvent to the club shaft.

Once you have sanded the grips, you will need to apply solvent to the club shaft. This will help to loosen the old adhesive and make it easier to remove the old grips. You can use a solvent that is specifically designed for golf grips, or you can use a mild solvent such as acetone or denatured alcohol.

4. Slide the new grip onto the club shaft.

Now that the old grips have been removed and the club shaft has been prepared, you can slide the new grip onto the shaft. Be sure to start at the bottom of the grip and work your way up. As you slide the grip onto the shaft, rotate it slightly to help spread the solvent evenly.

5. Rotate the grip until it is centered on the club shaft.

Once the new grip is on the shaft, you will need to rotate it until it is centered. You can do this by holding the grip in one hand and the club in the other. Rotate the grip until it is evenly aligned with the club head.

6. Tape the grip in place.

Finally, you will need to tape the grip in place to prevent it from slipping. You can use a piece of masking tape or a golf grip tape. Be sure to wrap the tape around the grip tightly to ensure that it stays in place.

4. Tips for Putting On New Grips

  • Make sure the grips are the right size for your clubs. If the grips are too small, they will be uncomfortable to hold and you will lose power on your swing. If the grips are too large, they will be difficult to control and you will have trouble making solid contact with the ball.
  • Use a solvent that is compatible with the type of grip you are using. Some solvents can damage certain types of grips, so it is important to use one that is specifically designed for golf grips.
  • Rotate the grip as you slide it onto the club shaft to prevent wrinkles. Wrinkles can make the grip uncomfortable to hold and can also affect your swing.
  • Tape the grip in place to prevent it from slipping. A loose grip can be dangerous, so it is important to make sure that it is securely taped in place.

Putting on new golf club grips is a simple process, but it is important to follow the steps carefully to ensure that the grips are installed correctly. By following these steps, you can ensure that your new grips will provide you with years of comfortable and consistent performance.

How do I remove the old grip?

To remove the old grip, you will need a golf club grip removal tool. Insert the tool between the grip and the shaft and twist until the grip pops off. Be careful not to damage the shaft.

What size grip do I need?

The size of the grip you need will depend on the size of your hands. To determine the correct size, wrap a piece of tape around your dominant hand, just below the knuckles. The tape should be snug, but not too tight. Measure the width of the tape in inches. The standard grip sizes are as follows:

  • Men: 4 1/4″ – 5 1/4″
  • Women: 4″ – 4 3/4″
  • Juniors: 3 1/2″ – 4″

How do I put on the new grip?

To put on the new grip, you will need a golf club grip solvent. Apply a thin coat of solvent to the inside of the grip and the shaft. Slide the grip onto the shaft, making sure that it is centered. Use a golf club grip press to squeeze the grip onto the shaft. Allow the solvent to dry completely before using the club.

How do I keep my grips from slipping?

There are a few things you can do to keep your grips from slipping. First, make sure that you use the correct size grip. Second, apply a grip conditioner to the grip every few months. Finally, wash your grips with warm water and soap after each round of golf.

What are the different types of golf grips?

There are three main types of golf grips:

  • Corded grips are made with a material that has a raised texture. This texture helps to provide a better grip, especially in wet conditions.
  • Lace grips are made with a material that is woven together. This type of grip is typically used for irons and wedges.
  • Touring grips are made with a soft, pliable material. This type of grip is typically used for drivers and fairway woods.

Which type of grip is best for me?

The best type of grip for you will depend on your personal preferences and playing style. If you have sweaty hands, a corded grip may be a good option. If you are looking for a lightweight grip, a lace grip may be a good option. If you want a grip that provides a lot of feedback, a touring grip may be a good option.

In this blog post, we have discussed how to put on new golf club grips. We covered the following topics:

  • The different types of golf club grips
  • The tools and materials you will need
  • The steps involved in putting on a new grip
  • Tips for a successful grip change

We hope that this information has been helpful and that you are now able to put on new golf club grips with confidence. If you have any further questions, please do not hesitate to contact us.

Here are some key takeaways from this blog post:

  • The type of golf club grip you choose will depend on your hand size, swing speed, and personal preference.
  • The tools and materials you will need to put on a new grip include a golf grip solvent, a golf grip wrench, and a towel.
  • The steps involved in putting on a new grip include removing the old grip, cleaning the shaft, applying solvent to the shaft, installing the new grip, and securing the grip with a grip wrench.
  • To ensure a successful grip change, make sure to follow the steps carefully and use the correct tools and materials.

Author Profile

Matthew Woods
Matthew Woods
Hello, fellow golf enthusiasts! I’m Matthew Woods, the founder of GolfPGAChampionship.com.

My journey with golf is a story of passion, perseverance, and a little twist of fate. Growing up in the picturesque town of Charleston, South Carolina, I found myself captivated by golf, a fascination that was partly kindled by sharing a last name with the legendary Tiger Woods.

This platform is more than just a website; it’s a culmination of my life’s experiences in golf. Here, I share in-depth analyses of PGA championships, personal anecdotes from my golfing journey, and tips for golfers at all levels. My aim? To make golf accessible and enjoyable for everyone, from eager beginners to seasoned players.

GolfPGAChampionship.com is a testament to my belief that golf is not just a sport, but a journey filled with learning, challenges, and personal growth. I invite you to join me in this journey, to explore the beautiful game of golf through my eyes and experiences.

Welcome to GolfPGAChampionship.com – let’s make every swing count!