How To Remove Governor On Golf Cart?

AvatarByMatthew Woods How To Guides

How to Remove the Governor on a Golf Cart

If you’re looking to increase the speed of your golf cart, you may be wondering how to remove the governor. The governor is a device that limits the speed of the cart by restricting the flow of fuel to the engine. By removing the governor, you can free up the engine and allow it to reach higher speeds.

However, it’s important to note that removing the governor can also make your golf cart more dangerous. It’s important to understand the risks involved before you decide to proceed.

In this article, we’ll discuss how to remove the governor on a golf cart. We’ll also provide some tips on how to safely operate your cart after you’ve made the modification.

So, if you’re ready to give your golf cart a speed boost, read on!

Step Instructions Image
1 Locate the governor on your golf cart. It is usually a small metal box located under the hood.
2 Remove the governor’s cover. This is usually held in place by a few screws or bolts.
3 Disconnect the governor’s wires. There will be two wires connected to the governor. Disconnect these wires by carefully pulling them off of the terminals.
4 Remove the governor. Once the wires are disconnected, you can remove the governor from the golf cart.
5 Replace the governor’s cover. If you removed the cover, you will need to replace it before you can put the hood back on.
6 Put the hood back on. Once the governor is removed and the cover is replaced, you can put the hood back on your golf cart.

How To Remove Governor On Golf Cart?

A governor is a device that limits the speed of a golf cart. It is typically located on the engine and is connected to the throttle linkage. The governor is a safety device that prevents the engine from over-revving. If the governor is not working properly, it can cause the engine to overheat and eventually fail.

This article will show you how to remove the governor on a golf cart. This is a relatively simple task that can be completed in about 30 minutes. However, it is important to follow the steps carefully to avoid damaging the golf cart.

Tools and Materials Needed

  • Wrench
  • Pliers
  • Screwdriver
  • Safety glasses
  • Work gloves

Steps to Remove the Governor

1. Locate the Governor. The governor is typically located on the engine, near the throttle linkage. It is a small, cylindrical device with a spring-loaded plunger.
2. Disconnect the Throttle Linkage. The throttle linkage is a metal rod that connects the governor to the throttle pedal. To disconnect the throttle linkage, you will need to remove the two bolts that hold it in place.
3. Remove the Governor. Once the throttle linkage is disconnected, you can remove the governor. To do this, you will need to remove the two bolts that hold it in place.
4. Inspect the Governor. Once the governor is removed, you should inspect it for damage. If the governor is damaged, you will need to replace it.
5. Reinstall the Governor. To reinstall the governor, you will need to reverse the steps you took to remove it.

Removing the governor on a golf cart is a relatively simple task that can be completed in about 30 minutes. However, it is important to follow the steps carefully to avoid damaging the golf cart. If you are not comfortable doing this task, you should have a qualified mechanic do it for you.

Here are some additional tips for removing the governor on a golf cart:

  • Make sure the engine is off and the keys are removed before you begin.
  • Wear safety glasses and work gloves to protect yourself from flying debris.
  • If the governor is stuck, you may need to use a penetrating oil to loosen it.
  • Be careful not to damage the throttle linkage or other components of the golf cart.

By following these tips, you can safely and easily remove the governor on your golf cart.

3. Remove the seat

The first step to removing the governor on a golf cart is to remove the seat. This is usually a simple process that can be completed in a few minutes.

To remove the seat, you will need to:

1. Locate the seat release lever. This is usually located on the bottom of the seat, near the front.
2. Press down on the release lever and lift up on the seat.
3. Remove the seat from the golf cart.

Once the seat is removed, you will have access to the governor.

4. Locate the governor

The governor is a small device that is located on the engine of the golf cart. It is responsible for limiting the speed of the golf cart.

The governor is usually a black or silver metal cylinder. It is located on the side of the engine, near the top.

To locate the governor, you will need to:

1. Locate the engine of the golf cart.
2. Look for a small black or silver metal cylinder.
3. The governor is usually located on the side of the engine, near the top.

Once you have located the governor, you can proceed to remove it.

Removing the governor on a golf cart is a simple process that can be completed in a few minutes. By following these steps, you can easily remove the governor and increase the speed of your golf cart.

How do I remove the governor on a golf cart?

1. Locate the governor. The governor is a small device that is usually located on the engine of the golf cart. It is typically a black box with a few wires attached to it.
2. Disconnect the battery. Before you can remove the governor, you will need to disconnect the battery. This will prevent the engine from starting and will make it easier to work on the governor.
3. Remove the governor mounting bolts. The governor is typically mounted to the engine with two or three bolts. Use a wrench to loosen and remove these bolts.
4. Remove the governor. Once the bolts are removed, you can carefully remove the governor from the engine. Be careful not to damage any of the surrounding components.
5. Reconnect the battery. Once the governor is removed, you can reconnect the battery.
6. Test the golf cart. Start the golf cart and let it run for a few minutes. Make sure that the governor is not interfering with the engine’s operation.

What are the symptoms of a bad governor?

There are a few symptoms that can indicate that the governor on your golf cart is bad. These include:

  • The golf cart is not accelerating as quickly as it used to.
  • The golf cart is making a strange noise when it accelerates.
  • The golf cart is running rough.
  • The golf cart is overheating.

If you notice any of these symptoms, it is a good idea to have the governor checked by a qualified technician.

What are the risks of driving a golf cart with a bad governor?

Driving a golf cart with a bad governor can be dangerous. A bad governor can cause the golf cart to accelerate too quickly or not accelerate at all. This can lead to accidents. Additionally, a bad governor can cause the golf cart to run rough or overheat, which can also lead to accidents.

If you suspect that the governor on your golf cart is bad, it is important to have it repaired or replaced as soon as possible.

How much does it cost to replace a governor on a golf cart?

The cost of replacing a governor on a golf cart can vary depending on the make and model of the golf cart. However, the average cost is between $100 and $200.

It is important to note that the cost of replacing a governor does not include the cost of labor. The labor cost will vary depending on the shop that you take your golf cart to.

Can I remove the governor on my golf cart myself?

It is possible to remove the governor on a golf cart yourself. However, it is important to note that this is a relatively complex procedure and should only be attempted by someone who is familiar with working on golf carts. If you are not comfortable working on your own golf cart, it is best to have the governor removed by a qualified technician.

What are the benefits of removing the governor on a golf cart?

There are a few benefits to removing the governor on a golf cart. These include:

  • Increased acceleration: Removing the governor can allow the golf cart to accelerate more quickly.
  • Increased top speed: Removing the governor can allow the golf cart to reach a higher top speed.
  • Improved performance: Removing the governor can improve the performance of the golf cart.

However, it is important to note that removing the governor can also make the golf cart more dangerous to drive. It is important to weigh the risks and benefits before making a decision about whether or not to remove the governor on your golf cart.

removing the governor on a golf cart is a relatively simple process that can be completed in a few minutes. By following the steps outlined in this article, you can safely and effectively increase the speed of your golf cart. However, it is important to note that doing so may void your warranty and could make your golf cart unsafe to operate. Therefore, it is important to weigh the risks and benefits before making a decision.

Author Profile

Matthew Woods
Matthew Woods
Hello, fellow golf enthusiasts! I’m Matthew Woods, the founder of GolfPGAChampionship.com.

My journey with golf is a story of passion, perseverance, and a little twist of fate. Growing up in the picturesque town of Charleston, South Carolina, I found myself captivated by golf, a fascination that was partly kindled by sharing a last name with the legendary Tiger Woods.

This platform is more than just a website; it’s a culmination of my life’s experiences in golf. Here, I share in-depth analyses of PGA championships, personal anecdotes from my golfing journey, and tips for golfers at all levels. My aim? To make golf accessible and enjoyable for everyone, from eager beginners to seasoned players.

GolfPGAChampionship.com is a testament to my belief that golf is not just a sport, but a journey filled with learning, challenges, and personal growth. I invite you to join me in this journey, to explore the beautiful game of golf through my eyes and experiences.

Welcome to GolfPGAChampionship.com – let’s make every swing count!