How to Adjust the Governor on a Golf Cart

AvatarByMatthew Woods How To Guides

How Do You Adjust the Governor on a Golf Cart?

Golf carts are a convenient way to get around a golf course, but they can also be a bit slow. If you’re looking to get a little more speed out of your golf cart, you may need to adjust the governor. The governor is a device that limits the speed of the engine, and by adjusting it, you can increase the top speed of your cart.

Adjusting the governor on a golf cart is a relatively simple process, but it is important to do it correctly. If you’re not comfortable working on your own golf cart, you may want to take it to a qualified mechanic.

In this article, we’ll walk you through the steps of adjusting the governor on a golf cart. We’ll provide detailed instructions and images to help you get the job done right.

So if you’re ready to give your golf cart a speed boost, read on!

Step Instructions Image
1 Locate the governor on your golf cart. The governor is a small, black box located near the engine.
2 Turn the governor adjustment screw clockwise to increase the speed limit or counterclockwise to decrease the speed limit.
3 Test the speed limit by driving your golf cart.

What is the governor on a golf cart?

The governor on a golf cart is a device that limits the speed of the cart. It is typically located on the engine and consists of a spring-loaded arm that contacts the throttle linkage. When the engine speed increases, the spring-loaded arm moves against the throttle linkage, causing the throttle to close slightly. This reduces the amount of air and fuel that is entering the engine, which in turn limits the speed of the cart.

The governor is an important safety feature on golf carts because it prevents them from going too fast. Golf carts are not designed for high speeds, and if they were allowed to go too fast, they could be dangerous. The governor helps to ensure that golf carts are operated safely.

How does the governor work?

The governor works by using a spring-loaded arm to contact the throttle linkage. When the engine speed increases, the spring-loaded arm moves against the throttle linkage, causing the throttle to close slightly. This reduces the amount of air and fuel that is entering the engine, which in turn limits the speed of the cart.

The governor is typically adjusted by turning a screw or bolt. Turning the screw or bolt clockwise will increase the tension on the spring, which will cause the governor to engage at a higher speed. Turning the screw or bolt counterclockwise will decrease the tension on the spring, which will cause the governor to engage at a lower speed.

The governor should be adjusted so that the golf cart reaches its maximum speed without going over the posted speed limit. The governor should also be adjusted so that the cart does not accelerate too quickly. If the cart accelerates too quickly, it could be dangerous.

Adjusting the governor is a simple procedure that can be done by anyone with basic mechanical skills. However, if you are not comfortable working on your golf cart, you should take it to a qualified mechanic.

The governor is an important safety feature on golf carts. It helps to prevent golf carts from going too fast, which could be dangerous. The governor is easy to adjust, and it should be adjusted so that the cart reaches its maximum speed without going over the posted speed limit.

How to adjust the governor on a golf cart

The governor on a golf cart is a device that limits the speed of the cart. It is located on the engine and is usually a spring-loaded plunger that pushes against the throttle linkage. When the engine reaches a certain speed, the governor plunger pushes against the linkage and prevents the throttle from opening any further. This limits the amount of air and fuel that can enter the engine, which in turn limits the engine speed.

The governor is an important safety feature on a golf cart because it prevents the cart from going too fast. If the governor were not there, the cart could easily reach speeds that could be dangerous.

Adjusting the governor on a golf cart is a relatively simple task that can be done by anyone with basic mechanical skills. However, it is important to note that adjusting the governor can affect the performance of the cart. If you are not sure how to adjust the governor, it is best to have a qualified mechanic do it for you.

To adjust the governor on a golf cart, you will need the following tools:

  • A Phillips head screwdriver
  • A flat head screwdriver
  • A wrench
  • A set of metric sockets

1. Locate the governor. The governor is usually located on the engine, near the throttle linkage. It is a small, cylindrical device with a spring-loaded plunger.
2. Remove the governor cover. The governor cover is usually held in place by a Phillips head screw. Remove the screw and carefully remove the cover.
3. Adjust the governor spring. The governor spring is located inside the governor. It is a small, cylindrical spring that is attached to the plunger. To adjust the spring, use a flat head screwdriver to turn the adjustment screw. Turning the screw clockwise will tighten the spring, which will increase the speed of the governor. Turning the screw counterclockwise will loosen the spring, which will decrease the speed of the governor.
4. Reinstall the governor cover. Once you have adjusted the governor spring, reinstall the governor cover. Make sure that the cover is securely tightened in place.
5. Test the governor. Start the engine and let it warm up. Then, accelerate the cart to full speed. The cart should not exceed the speed that you set by adjusting the governor spring.

If the cart does exceed the speed that you set, you may need to adjust the spring again. Repeat steps 3 and 4 until the cart reaches the desired speed.

What to do if you can’t adjust the governor

If you are unable to adjust the governor on your golf cart, there are a few things that you can do.

  • Check the governor spring. The governor spring is a critical component of the governor. If the spring is damaged or broken, it will not be able to function properly. To check the spring, remove the governor cover and inspect the spring. If the spring is damaged or broken, you will need to replace it.
  • Check the governor linkage. The governor linkage is the mechanism that connects the governor to the throttle. If the linkage is damaged or misaligned, it will not be able to properly regulate the speed of the cart. To check the linkage, remove the governor cover and inspect the linkage. If the linkage is damaged or misaligned, you will need to repair or replace it.
  • Take your golf cart to a qualified mechanic. If you are unable to adjust the governor or if you suspect that there is a problem with the governor, it is best to take your golf cart to a qualified mechanic. A mechanic will be able to diagnose the problem and make the necessary repairs.

By following these tips, you can ensure that the governor on your golf cart is properly adjusted and functioning properly. This will help to keep you and your passengers safe while you are on the course.

How do you adjust the governor on a golf cart?

1. Locate the governor. The governor is a small, metal device located on the engine of your golf cart. It is usually a black or silver box with a few wires attached to it.
2. Turn off the engine. Make sure that the engine is off before you begin adjusting the governor.
3. Remove the governor cover. The governor cover is a small, metal plate that protects the governor. It is usually held in place by a few screws. Remove the screws and carefully remove the cover.
4. Adjust the governor spring. The governor spring is a small, metal spring that controls the speed of the engine. It is located inside the governor. To adjust the spring, use a small screwdriver to turn the adjustment screw. Turning the screw clockwise will increase the speed of the engine, and turning it counterclockwise will decrease the speed of the engine.
5. Reinstall the governor cover. Once you have adjusted the governor spring, reinstall the governor cover. Make sure that the cover is securely fastened in place.
6. Start the engine and test the speed. Start the engine and let it run for a few minutes. Test the speed of the engine by accelerating and decelerating. The engine should now be running at the desired speed.

What are the symptoms of a bad governor?

  • The golf cart is not accelerating properly.
  • The golf cart is running too fast.
  • The golf cart is jerking or hesitating when you accelerate.
  • The golf cart is stalling when you come to a stop.

How do I replace a governor on a golf cart?

1. Locate the governor. The governor is a small, metal device located on the engine of your golf cart. It is usually a black or silver box with a few wires attached to it.
2. Turn off the engine. Make sure that the engine is off before you begin replacing the governor.
3. Disconnect the wires from the governor. There are usually two or three wires connected to the governor. Carefully disconnect the wires from the governor.
4. Remove the governor mounting bolts. There are usually two or three bolts that hold the governor in place. Use a wrench to loosen and remove the bolts.
5. Remove the governor. Carefully remove the governor from the engine.
6. Install the new governor. Align the new governor with the mounting holes on the engine. Insert the mounting bolts and tighten them with a wrench.
7. Reconnect the wires to the governor. Reconnect the wires to the governor. Make sure that the wires are connected to the correct terminals.
8. Start the engine and test the governor. Start the engine and let it run for a few minutes. Test the governor by accelerating and decelerating. The golf cart should now be running at the desired speed.

What are the dangers of driving a golf cart with a bad governor?

Driving a golf cart with a bad governor can be dangerous. A bad governor can cause the golf cart to accelerate too quickly or stall unexpectedly. This can lead to accidents, injuries, and even death.

How can I prevent a bad governor?

There are a few things you can do to prevent a bad governor:

  • Regularly maintain your golf cart. This includes changing the oil, checking the fluids, and inspecting the engine for damage.
  • Do not overload your golf cart. Overloading your golf cart can put stress on the governor and cause it to fail.
  • Avoid driving your golf cart in water. Water can damage the governor and cause it to fail.
  • Do not use your golf cart on steep hills. Steep hills can put stress on the governor and cause it to fail.

By following these tips, you can help prevent a bad governor and keep your golf cart running safely.

adjusting the governor on a golf cart is a relatively simple process that can be completed in a few minutes. By following the steps outlined in this article, you can ensure that your golf cart is running at its optimal speed and performance.

Here are a few key takeaways to remember:

  • The governor is a mechanical device that limits the speed of a golf cart.
  • The governor is located on the engine and is typically adjusted by turning a screw or bolt.
  • Increasing the governor setting will allow the golf cart to go faster, while decreasing the setting will limit its speed.
  • It is important to adjust the governor setting carefully, as too much speed can be dangerous.
  • If you are unsure how to adjust the governor on your golf cart, consult your owner’s manual or a qualified mechanic.

Author Profile

Matthew Woods
Matthew Woods
Hello, fellow golf enthusiasts! I’m Matthew Woods, the founder of GolfPGAChampionship.com.

My journey with golf is a story of passion, perseverance, and a little twist of fate. Growing up in the picturesque town of Charleston, South Carolina, I found myself captivated by golf, a fascination that was partly kindled by sharing a last name with the legendary Tiger Woods.

This platform is more than just a website; it’s a culmination of my life’s experiences in golf. Here, I share in-depth analyses of PGA championships, personal anecdotes from my golfing journey, and tips for golfers at all levels. My aim? To make golf accessible and enjoyable for everyone, from eager beginners to seasoned players.

GolfPGAChampionship.com is a testament to my belief that golf is not just a sport, but a journey filled with learning, challenges, and personal growth. I invite you to join me in this journey, to explore the beautiful game of golf through my eyes and experiences.

Welcome to GolfPGAChampionship.com – let’s make every swing count!