How to Adjust the Governor on Your Yamaha Golf Cart

AvatarByMatthew Woods How To Guides

How to Adjust Your Yamaha Golf Cart Governor

Your Yamaha golf cart’s governor is a vital part of the engine that controls the maximum speed of the cart. If the governor is not adjusted properly, your cart may not reach its full speed, or it may run too fast and be unsafe.

Adjusting the governor is a simple process that can be done in just a few minutes. However, it is important to follow the steps carefully to avoid damaging your cart.

In this article, we will walk you through the process of adjusting your Yamaha golf cart’s governor. We will provide detailed instructions and images to help you understand the process.

So, if you’re ready to learn how to adjust your Yamaha golf cart’s governor, read on!

“`html

Step Instructions Image
1 Locate the governor on the engine. It is a small, black box with a potentiometer knob on the front.
2 Turn the potentiometer knob clockwise to increase the speed limit or counterclockwise to decrease the speed limit.
3 Test the golf cart to make sure the speed limit has been adjusted correctly.

“`

A governor is a device that limits the speed of an engine. In a golf cart, the governor is typically located on the engine and is adjusted by turning a screw. By turning the screw clockwise, you will increase the speed of the governor. Turning the screw counterclockwise will decrease the speed of the governor.

Adjusting the governor on a Yamaha golf cart is a relatively simple task that can be completed in a few minutes. However, it is important to follow the steps carefully to avoid damaging the governor or the engine.

Tools and Materials

The following tools and materials are required to adjust the governor on a Yamaha golf cart:

  • 10mm wrench
  • 12mm wrench
  • Phillips head screwdriver
  • Flat head screwdriver
  • Governor adjustment tool
  • Safety glasses
  • Work gloves

Steps

1. Park the golf cart on a level surface.
2. Turn off the engine and allow it to cool down.
3. Put on your safety glasses and work gloves.
4. Locate the governor on the engine. The governor is typically located on the top of the engine, near the carburetor.
5. Use the 10mm wrench to loosen the locknut on the governor. The locknut is located on the side of the governor.
6. Use the 12mm wrench to turn the governor adjustment screw. Turn the screw clockwise to increase the speed of the governor. Turn the screw counterclockwise to decrease the speed of the governor.
7. Retighten the locknut on the governor.
8. Start the engine and test the speed. The engine should now be running at the desired speed.

Adjusting the governor on a Yamaha golf cart is a relatively simple task that can be completed in a few minutes. By following the steps carefully, you can ensure that the governor is properly adjusted and that the engine is running at the desired speed.

Here are some additional tips for adjusting the governor on a Yamaha golf cart:

  • If you are not comfortable working on your golf cart, it is best to have a qualified technician perform the adjustment.
  • Make sure to check the owner’s manual for your specific golf cart model for more information on adjusting the governor.
  • Always wear safety glasses and work gloves when working on your golf cart.

How To Adjust Yamaha Golf Cart Governor?

The governor on a Yamaha golf cart controls the maximum speed of the cart. If the governor is not adjusted correctly, the cart may not reach its full speed or may accelerate too quickly. To adjust the governor, you will need to:

1. Locate the governor. The governor is located on the engine. It is a small, metal box with a black cap.
2. Remove the governor cap. To remove the cap, you will need to use a small screwdriver.
3. Turn the governor adjustment screw. The adjustment screw is located inside the governor cap. It is a small, Phillips head screw.
4. Turn the adjustment screw clockwise to increase the maximum speed of the cart. Turn the adjustment screw counterclockwise to decrease the maximum speed of the cart.
5. Reinstall the governor cap.
6. Test the cart to make sure the governor is adjusted correctly.

Here are some additional tips for adjusting the governor on a Yamaha golf cart:

  • Make sure the cart is in neutral when you are adjusting the governor.
  • Do not adjust the governor too much. If you adjust the governor too much, the cart may become unstable.
  • If you are not sure how to adjust the governor, you can take the cart to a qualified Yamaha dealer.

Park the golf cart on a level surface.

Before you can adjust the governor on a Yamaha golf cart, you need to park the cart on a level surface. This will ensure that the cart is stable and that the governor is adjusted correctly.

Engage the parking brake.

Once you have parked the cart on a level surface, you need to engage the parking brake. This will prevent the cart from rolling away while you are adjusting the governor.

To engage the parking brake, you will need to:

1. Press down on the parking brake pedal.
2. Move the parking brake lever to the “engaged” position.

The parking brake lever is located on the left side of the steering column. It is a small, black lever.

Adjusting the governor on a Yamaha golf cart is a simple process. By following these steps, you can ensure that your cart is operating at its best.

Here are some additional resources that you may find helpful:

  • [Yamaha Golf Cart Owner’s Manual](https://www.yamahamotorsports.com/documents/owners-manuals/golf-carts/2023-Golf-Cart-Owners-Manual.pdf)
  • [Yamaha Golf Cart Service Manual](https://www.yamahamotorsports.com/documents/service-manuals/golf-carts/2023-Golf-Cart-Service-Manual.pdf)
  • [Yamaha Golf Cart Technical Bulletins](https://www.yamahamotorsports.com/documents/technical-bulletins/golf-carts/)

    How do I adjust the governor on my Yamaha golf cart?

1. Locate the governor. The governor is a small, metal device that is located on the engine. It is typically located near the carburetor.
2. Turn the governor screw. The governor screw is a small, Phillips head screw that is located on the governor. Turning the screw clockwise will increase the speed of the cart, and turning it counterclockwise will decrease the speed.
3. Test the speed of the cart. After adjusting the governor, start the cart and let it run for a few minutes. Then, accelerate the cart and check the speed. If the speed is not what you want, adjust the governor again and repeat step 3.

What happens if I adjust the governor too much?

If you adjust the governor too much, the cart may become unstable and dangerous to drive. The engine may also overheat, which can damage the engine.

What happens if I adjust the governor too little?

If you adjust the governor too little, the cart may not be able to reach its top speed. This can be frustrating, especially if you are trying to keep up with other carts on the course.

**How often should I adjust the governor?

You should only adjust the governor if you are experiencing problems with the speed of the cart. If the cart is running properly, there is no need to adjust the governor.

Can I adjust the governor myself, or should I take it to a mechanic?

You can adjust the governor yourself, but it is important to be careful not to adjust it too much or too little. If you are not comfortable doing this yourself, you can take the cart to a mechanic.

What other maintenance should I do to my golf cart?

In addition to adjusting the governor, you should also regularly maintain your golf cart. This includes changing the oil, checking the tire pressure, and inspecting the brakes. By following these simple steps, you can help keep your golf cart running smoothly for many years to come.

In this blog post, we have discussed how to adjust the governor on a Yamaha golf cart. We have covered the steps involved in the process, as well as some of the things to keep in mind. We hope that this information has been helpful, and that you are now able to adjust the governor on your own.

Here are some key takeaways from this blog post:

  • The governor is a device that limits the speed of a golf cart.
  • The governor is located on the engine.
  • To adjust the governor, you will need to remove the governor cover.
  • The governor is adjusted by turning the governor screw.
  • Turning the governor screw clockwise will increase the speed of the golf cart.
  • Turning the governor screw counterclockwise will decrease the speed of the golf cart.

It is important to note that adjusting the governor can be dangerous. If you are not comfortable working on your golf cart, you should take it to a qualified mechanic.

Author Profile

Matthew Woods
Matthew Woods
Hello, fellow golf enthusiasts! I’m Matthew Woods, the founder of GolfPGAChampionship.com.

My journey with golf is a story of passion, perseverance, and a little twist of fate. Growing up in the picturesque town of Charleston, South Carolina, I found myself captivated by golf, a fascination that was partly kindled by sharing a last name with the legendary Tiger Woods.

This platform is more than just a website; it’s a culmination of my life’s experiences in golf. Here, I share in-depth analyses of PGA championships, personal anecdotes from my golfing journey, and tips for golfers at all levels. My aim? To make golf accessible and enjoyable for everyone, from eager beginners to seasoned players.

GolfPGAChampionship.com is a testament to my belief that golf is not just a sport, but a journey filled with learning, challenges, and personal growth. I invite you to join me in this journey, to explore the beautiful game of golf through my eyes and experiences.

Welcome to GolfPGAChampionship.com – let’s make every swing count!