How to Remove the Governor on a Golf Cart (Without voiding your warranty!)

How to Remove the Governor on a Golf Cart

If you’re looking to increase the speed of your golf cart, you may be wondering how to remove the governor. The governor is a device that limits the speed of the cart by regulating the flow of fuel to the engine. By removing the governor, you can free up the engine and allow it to reach higher speeds.

However, it’s important to note that removing the governor can be dangerous. Golf carts are not designed to go at high speeds, and doing so can make them unstable and difficult to control. If you’re not experienced with working on engines, it’s best to leave the governor in place.

If you do decide to remove the governor, be sure to take precautions to stay safe. Wear gloves and eye protection, and work in a well-ventilated area. Follow the steps below carefully, and be sure to replace the governor if you ever decide to sell your golf cart.

1. Locate the governor. The governor is usually located on the engine, near the carburetor. It’s a small, cylindrical device with a spring-loaded plunger.
2. Disconnect the battery. This will prevent the engine from starting while you’re working on it.
3. Remove the governor’s mounting bolts. These are usually located on the sides of the governor.
4. Remove the governor. Carefully lift the governor off of the engine.
5. Replace the governor’s mounting bolts.
6. Reconnect the battery.

That’s it! You’ve now successfully removed the governor from your golf cart. Be sure to test the cart’s speed before you take it out on the course. And remember, always wear safety gear when working on engines.

Step	Instructions	Image
1	Locate the governor on your golf cart. It is typically a small, black box located near the engine.
2	Disconnect the battery cables from the golf cart. This will prevent the engine from starting while you are working on it.
3	Remove the screws that hold the governor in place. Once the screws are removed, you should be able to lift the governor out of the golf cart.
4	Replace the governor with a new one. Make sure that the new governor is the same size and type as the old one.
5	Reconnect the battery cables to the golf cart.
6	Test the golf cart to make sure that the governor is working properly.

Tools and Materials Needed

To remove the governor on a golf cart, you will need the following tools and materials:

• Wrench
• Pliers
• Screwdriver
• Safety glasses
• Work gloves

Steps to Remove the Governor

1. Locate the governor. The governor is a small device that is typically located on the engine of the golf cart. It is usually a black box with a few wires attached to it.
2. Disconnect the battery. Before you begin any work on the golf cart, it is important to disconnect the battery to prevent any electrical shocks.
3. Remove the governor cover. The governor cover is usually a small metal plate that is held in place by a few screws. Remove the screws and set the cover aside.
4. Disconnect the governor wires. There will be a few wires connected to the governor. Carefully disconnect these wires by pulling them straight out of the connector.
5. Remove the governor mounting bolts. The governor is usually mounted to the engine with a few bolts. Use a wrench to loosen and remove these bolts.
6. Remove the governor. Once the bolts are removed, the governor can be lifted off of the engine.
7. Install the new governor. If you are replacing the governor, install the new one in the same location as the old one. Make sure to tighten the mounting bolts securely.
8. Reconnect the battery. Once the governor is installed, reconnect the battery.
9. Test the golf cart. Start the golf cart and let it run for a few minutes. Make sure that the governor is working properly by checking the speed of the golf cart.

Removing the governor on a golf cart is a relatively simple task that can be completed in a few minutes. By following the steps in this guide, you can safely and effectively remove the governor and install a new one.

How To Remove The Governor On A Golf Cart?

The governor on a golf cart is a device that limits the speed of the engine. It does this by controlling the amount of fuel that is allowed to enter the engine. If you want to increase the speed of your golf cart, you will need to remove the governor.

This guide will show you how to remove the governor on a golf cart. It is important to note that this process can be dangerous if you are not careful. Make sure that you disconnect the battery before you begin and follow all of the steps carefully.

Locate the Governor

The governor on a golf cart is typically located on the engine, near the carburetor. It is a small, metal device with a spring-loaded lever.

Turn Off the Engine and Disconnect the Battery

Before you can remove the governor, you will need to turn off the engine and disconnect the battery. This will prevent the engine from starting accidentally while you are working on it.

To turn off the engine, simply press the stop button. To disconnect the battery, locate the battery terminals and disconnect the negative terminal first, then the positive terminal.

Remove the Governor

Once the engine is off and the battery is disconnected, you can begin to remove the governor.

1. Locate the governor on the engine. It is typically a small, metal device with a spring-loaded lever.
2. Use a screwdriver to pry off the governor’s cover.
3. Remove the governor’s spring.
4. Remove the governor’s lever.
5. Reinstall the governor’s cover.

That’s it! You have now successfully removed the governor from your golf cart.

Removing the governor from your golf cart can increase the speed of the engine. However, it is important to note that this can also make the cart more dangerous to drive. Make sure that you are aware of the risks before you make this modification.

If you have any questions about removing the governor from your golf cart, please consult with a qualified mechanic.

How do I remove the governor on a golf cart?

1. Locate the governor. The governor is a small device that is typically located on the engine of the golf cart. It is usually a black box with a wire coming out of it.
2. Disconnect the wire from the governor. The wire from the governor will be connected to the ignition switch. Disconnect the wire by pulling it off of the switch.
3. Remove the governor. The governor is usually held in place by a few screws. Remove the screws to remove the governor.
4. Reinstall the governor. If you plan on reinstalling the governor, be sure to replace the screws.

What happens if I remove the governor on my golf cart?

Removing the governor will allow the golf cart to go faster. However, it is important to note that doing so can also make the golf cart less safe. Golf carts are not designed to go at high speeds, and removing the governor can increase the risk of accidents.

Is it legal to remove the governor on a golf cart?

The legality of removing the governor on a golf cart varies from state to state. In some states, it is illegal to remove the governor on a golf cart. In other states, it is legal to remove the governor, but only if the golf cart is being used on private property. It is important to check the laws in your state before removing the governor on your golf cart.

What are the risks of removing the governor on a golf cart?

There are several risks associated with removing the governor on a golf cart. These risks include:

• Increased risk of accidents.
• Increased wear and tear on the golf cart’s engine.
• Reduced fuel efficiency.
• Increased noise pollution.

How can I safely remove the governor on my golf cart?

If you decide to remove the governor on your golf cart, it is important to do so safely. Here are a few tips:

• Only remove the governor if you are familiar with the golf cart’s engine.
• Make sure to disconnect the wire from the ignition switch before removing the governor.
• Be careful not to drop any screws or parts.
• Reinstall the governor if you plan on selling the golf cart.

Can I install a different governor on my golf cart?

Yes, you can install a different governor on your golf cart. However, it is important to make sure that the new governor is compatible with the golf cart’s engine. You can find a compatible governor by contacting the golf cart manufacturer or a qualified mechanic.

In this blog post, we have discussed how to remove the governor on a golf cart. We have provided a step-by-step guide, as well as some tips and tricks. We hope that this information has been helpful to you. If you have any questions, please feel free to leave them in the comments section below.