How to Reshaft Golf Clubs for Better Performance

AvatarByMatthew Woods How To Guides

How to Reshaft Golf Clubs

Golf is a game that can be enjoyed by people of all ages and skill levels. However, even the most experienced golfers can occasionally damage their clubs. If you’ve ever broken a golf shaft, you know how frustrating it can be to find a replacement. Luckily, reshafting a golf club is a relatively simple process that can be completed at home with a few basic tools.

In this article, we’ll walk you through the steps of reshafting a golf club, from choosing the right shaft to installing it in your clubhead. We’ll also provide tips on how to make sure your reshafted club performs as well as new.

So if you’re ready to give reshafting a try, read on!

How To Reshaft Golf Clubs?

| Step | Description | Tools |
|—|—|—|
| 1 | Remove the old shaft. | Club head wrench |
| 2 | Clean the inside of the club head. | Rag |
| 3 | Insert the new shaft into the club head. | Hammer |
| 4 | Align the shaft with the club head. | Eyeball |
| 5 | Tap the shaft into place with a hammer. | Hammer |
| 6 | Apply epoxy to the shaft. | Epoxy |
| 7 | Allow the epoxy to dry. | 24 hours |
| 8 | Test the club head. | Swing the club |

How to Reshaft Golf Clubs?

Reshafting a golf club is a relatively simple process that can be completed at home with the right tools and materials. However, it is important to follow the steps carefully to ensure that the job is done correctly.

This guide will walk you through the process of reshafting a golf club, from choosing the right shaft to installing it in the head.

Choosing the Right Shaft

The first step in reshafting a golf club is choosing the right shaft. There are a number of factors to consider when making this decision, including:

  • Shaft flex: The flex of the shaft refers to how much it bends when you swing the club. Shafts are typically classified as “stiff,” “regular,” or “senior.” The right flex for you will depend on your swing speed and strength.
  • Shaft weight: The weight of the shaft can also affect the way the club feels and performs. Heavier shafts are more stable, while lighter shafts are easier to swing.
  • Shaft length: The length of the shaft will affect the trajectory of your shots. Longer shafts produce higher, more-lobbed shots, while shorter shafts produce lower, more-penetrating shots.
  • Shaft material: Shafts are typically made from a variety of materials, including graphite, steel, and titanium. Graphite shafts are lighter and more flexible than steel shafts, while titanium shafts are stiffer and more durable.

Once you have considered all of these factors, you can start to narrow down your choices. It is important to try out different shafts before you make a final decision. This will help you find a shaft that feels comfortable and performs well for you.

Removing the Old Shaft

Before you can install a new shaft in your golf club, you need to remove the old shaft. This can be done by following these steps:

1. Remove the grip. The first step is to remove the grip from the club head. To do this, you will need a golf grip remover. Insert the grip remover between the grip and the shaft and twist it until the grip comes loose.
2. Remove the ferrule. The ferrule is the metal cap that covers the end of the shaft. To remove the ferrule, you will need a ferrule remover. Insert the ferrule remover into the ferrule and twist it until it comes loose.
3. Remove the old shaft. Now that the grip and ferrule are removed, you can remove the old shaft. To do this, you will need a shaft puller. Insert the shaft puller into the shaft and twist it until the shaft comes loose.

Installing the New Shaft

Once you have removed the old shaft, you can install the new shaft. To do this, follow these steps:

1. Apply epoxy to the shaft. Before you insert the new shaft, you will need to apply epoxy to the end of the shaft. This will help to create a bond between the shaft and the club head.
2. Insert the shaft. Once the epoxy is applied, you can insert the new shaft into the club head. Make sure that the shaft is inserted all the way into the head.
3. Align the shaft. Once the shaft is inserted, you will need to align it with the club head. To do this, look down the shaft and make sure that it is parallel to the ground.
4. Install the ferrule. Now that the shaft is aligned, you can install the ferrule. To do this, simply press the ferrule onto the end of the shaft.
5. Install the grip. Finally, you can install the grip. To do this, simply slide the grip onto the shaft and tighten it with a grip wrench.

That’s it! You have now successfully reshafted your golf club.

Reshafting a golf club is a relatively simple process that can be completed at home with the right tools and materials. However, it is important to follow the steps carefully to ensure that the job is done correctly.

By following this guide, you can reshaft your golf club and get back to playing your best golf in no time.

Additional Tips

Here are a few additional tips to help you reshaft your golf club:

  • Use a torque wrench to tighten the grip. This will help to ensure that the grip is installed correctly and that it will not come loose during play.
  • Test the club before you play. Once you have reshafted your club, take it to the range and hit a few balls. This will help you to make sure that the club is performing properly and that you are comfortable with the new shaft.

* **Don’t be afraid to experiment.

3. Installing the New Shaft

Once you have selected the new shaft for your golf club, it’s time to install it. This process is relatively simple, but there are a few steps you need to follow to ensure that the shaft is installed correctly.

1. Installing the ferrule. The ferrule is a small, cylindrical piece of plastic or metal that fits over the end of the shaft and helps to protect it from damage. To install the ferrule, first slide it onto the end of the shaft. Then, use a mallet or hammer to gently tap the ferrule into place.
2. Installing the grip. The grip is the part of the club that you hold in your hand. To install the grip, first remove the old grip from the club. You can do this by using a grip remover tool or by cutting the grip off with a utility knife. Once the old grip is removed, apply a thin layer of grip tape to the shaft. Then, slide the new grip onto the shaft and start twisting it until it is snug.
3. Installing the new shaft. To install the new shaft, first remove the old shaft from the club. You can do this by using a hose clamp or by driving a nail through the hose clamp and into the shaft. Once the old shaft is removed, slide the new shaft into the club head. Then, use a mallet or hammer to gently tap the shaft into place.

4. Testing the New Shaft

Once you have installed the new shaft, it’s time to test it out. Hit some balls on the range and see how the new shaft feels. Make sure that the shaft is the right length and flex for your swing. You may need to adjust the swing weight of the club if the new shaft is lighter or heavier than the old shaft.

To adjust the swing weight, you can add or remove lead tape to the club head. You can also add or remove weight to the grip. Once you have adjusted the swing weight, hit some more balls and see how the club feels.

If you are happy with the way the new shaft feels, you can fine-tune the setup of your golf club. You can do this by adjusting the loft and lie of the club. You can also adjust the grip size and the position of the grip on the shaft.

Reshafting a golf club is a relatively simple process, but it is important to follow the steps carefully to ensure that the shaft is installed correctly. By following these steps, you can extend the life of your golf club and improve your performance on the course.

How To Reshaft Golf Clubs?

Q: What are the steps involved in reshafting a golf club?

A: The steps involved in reshafting a golf club are as follows:

1. Remove the old shaft from the clubhead.
2. Select a new shaft that is the correct length, flex, and weight for your swing.
3. Align the new shaft with the clubhead and insert it into the hosel.
4. Secure the shaft in place with epoxy or a ferrule.
5. Allow the epoxy to dry completely before using the club.

Q: What tools do I need to reshaft a golf club?

A: The tools you need to reshaft a golf club include:

  • A club head wrench
  • A shaft extractor
  • A shaft installation tool
  • Epoxy or a ferrule
  • A hammer
  • A vise
  • A towel

Q: How much does it cost to reshaft a golf club?

A: The cost of reshafting a golf club varies depending on the type of club and the materials used. Reshafting a driver can cost anywhere from $50 to $100, while reshafting an iron can cost anywhere from $20 to $40.

Q: Is it difficult to reshaft a golf club?

A: Reshafting a golf club is not difficult, but it does require some patience and skill. If you are not comfortable working with tools, you may want to have a professional reshaft your club.

Q: What are the benefits of reshafting a golf club?

There are several benefits to reshafting a golf club, including:

  • Improved performance: A new shaft can help you to improve your swing speed, distance, and accuracy.
  • Increased comfort: A new shaft can also help to make your golf swing more comfortable.
  • Customization: Reshafting a golf club allows you to customize the weight, flex, and length of the shaft to your specific needs.

Q: What are the risks of reshafting a golf club?

There are a few risks associated with reshafting a golf club, including:

  • Damaging the clubhead: If you are not careful, you can damage the clubhead during the reshafting process.
  • Creating an inconsistent swing: If the shaft is not installed properly, it can lead to an inconsistent swing.
  • Incurring additional costs: If you do not have the tools or skills to reshaft a golf club, you may have to pay a professional to do it for you.

    Reshafting golf clubs is a relatively simple process that can be completed at home with a few basic tools. In this comprehensive guide, we have outlined the steps involved in reshafting a golf club, from choosing the right shaft to installing it in the clubhead. We have also provided tips on how to avoid common mistakes and ensure that your reshafted club performs as well as new.

By following these steps, you can easily reshaft your own golf clubs and save yourself a significant amount of money. So what are you waiting for? Get started today!

Here are some key takeaways from this article:

  • Reshafting golf clubs is a relatively simple process that can be completed at home with a few basic tools.
  • The most important step in reshafting a club is choosing the right shaft.
  • Once you have chosen the right shaft, you can install it in the clubhead using a press or a hammer and dowel rod.
  • Be sure to follow the manufacturer’s instructions when reshafting your clubs to avoid damaging them.
  • Reshafting your clubs can help you improve your golf game by giving you more control over your shots.

Author Profile

Matthew Woods
Matthew Woods
Hello, fellow golf enthusiasts! I’m Matthew Woods, the founder of GolfPGAChampionship.com.

My journey with golf is a story of passion, perseverance, and a little twist of fate. Growing up in the picturesque town of Charleston, South Carolina, I found myself captivated by golf, a fascination that was partly kindled by sharing a last name with the legendary Tiger Woods.

This platform is more than just a website; it’s a culmination of my life’s experiences in golf. Here, I share in-depth analyses of PGA championships, personal anecdotes from my golfing journey, and tips for golfers at all levels. My aim? To make golf accessible and enjoyable for everyone, from eager beginners to seasoned players.

GolfPGAChampionship.com is a testament to my belief that golf is not just a sport, but a journey filled with learning, challenges, and personal growth. I invite you to join me in this journey, to explore the beautiful game of golf through my eyes and experiences.

Welcome to GolfPGAChampionship.com – let’s make every swing count!