How To Take Off A Governor On A Golf Cart?

AvatarByMatthew Woods How To Guides

How to Take Off a Governor on a Golf Cart

If you’re looking to increase the speed of your golf cart, you may be wondering how to take off the governor. A governor is a device that limits the speed of an engine, and it’s typically installed on golf carts to prevent them from going too fast. However, if you’re an experienced driver and you’re comfortable with the risks involved, you can remove the governor yourself.

In this article, we’ll walk you through the steps of how to take off a governor on a golf cart. We’ll also provide some tips on how to safely operate your golf cart at higher speeds.

Before you begin, make sure you read and understand the owner’s manual for your golf cart. This will help you identify the location of the governor and any other important safety information.

Step Instructions Image
1 Locate the governor on your golf cart.
2 Remove the screws that hold the governor in place.
3 Disconnect the wires from the governor.
4 Reinstall the screws that held the governor in place.

What is a governor on a golf cart?

A governor on a golf cart is a device that limits the speed of the cart. It is typically a mechanical device that uses a centrifugal governor to control the speed of the engine. As the engine speed increases, the centrifugal governor causes the governor spring to compress, which in turn closes the throttle plate and reduces the amount of air and fuel that can enter the engine. This reduces the power output of the engine and limits the speed of the cart.

Why would you want to remove a governor on a golf cart?

There are a few reasons why you might want to remove the governor on a golf cart.

  • To increase the speed of the cart. The governor is designed to limit the speed of the cart to a safe level. If you are an experienced driver and you want to go faster, you can remove the governor to increase the top speed of the cart.
  • To improve performance. Removing the governor can improve the performance of the cart by allowing the engine to rev higher. This can make the cart accelerate faster and give it more power when climbing hills.
  • To make the cart more fun to drive. For some people, removing the governor is simply a way to make the cart more fun to drive. It can be more exciting to drive a cart that is faster and has more power.

How to remove a governor on a golf cart

Removing a governor on a golf cart is a relatively simple process. However, it is important to follow the instructions carefully to avoid damaging the cart.

1. Locate the governor. The governor is typically located on the engine. It is a small, round device with a spring-loaded plunger in the center.
2. Disconnect the battery. This will prevent the engine from starting while you are working on it.
3. Remove the governor cover. The governor cover is typically held in place by a few screws. Remove the screws and lift off the cover.
4. Remove the governor spring. The governor spring is located inside the governor. It is a small, round spring that is attached to the plunger. Use a pair of pliers to carefully remove the spring.
5. Replace the governor cover. Replace the governor cover and tighten the screws.
6. Reconnect the battery.

Now that the governor has been removed, the cart should be able to go faster. However, it is important to note that the cart will also be less fuel-efficient and may be more difficult to control.

Removing the governor on a golf cart is a relatively simple process, but it is important to follow the instructions carefully to avoid damaging the cart. If you are not comfortable working on your own cart, it is best to take it to a qualified mechanic.

How to remove a governor on a golf cart

A governor is a device that limits the speed of a golf cart. It is typically located on the engine and is connected to the throttle. When the throttle is opened, the governor senses the increase in engine speed and limits it to a predetermined level.

There are a few reasons why you might want to remove the governor from your golf cart. You may want to increase the top speed of your cart, or you may simply want to be able to accelerate more quickly.

Removing the governor is a relatively simple process, but it does require some basic mechanical skills. You will also need a few tools, including a wrench, a screwdriver, and a socket set.

To remove the governor, follow these steps:

1. Locate the governor. The governor is typically located on the engine, near the throttle. It is a small, cylindrical device with a metal rod attached to it.
2. Disconnect the battery. This will prevent the engine from starting while you are working on it.
3. Remove the governor cover. The governor cover is a small, metal plate that covers the governor. It is typically held in place by a few screws. Remove the screws and set the cover aside.
4. Disconnect the governor linkage. The governor linkage is a metal rod that connects the governor to the throttle. It is typically held in place by a clip or a bolt. Remove the clip or bolt and disconnect the linkage.
5. Remove the governor. The governor is now free to be removed. Simply grasp it and pull it off of the engine.

Once the governor has been removed, you can reinstall the governor cover and reconnect the battery. Your golf cart is now free to run at its full potential.

Note: It is important to note that removing the governor can void your golf cart’s warranty. Additionally, removing the governor can make your golf cart more dangerous to operate. If you are not comfortable working on your golf cart, you should have a qualified technician do it for you.

Safety precautions when removing a governor on a golf cart

When removing the governor from a golf cart, it is important to take the following safety precautions:

  • Disconnect the battery. This will prevent the engine from starting while you are working on it.
  • Use the proper tools. Make sure you have the right tools for the job, such as a wrench, a screwdriver, and a socket set.
  • Be careful not to damage the governor. The governor is a delicate device, so be careful not to damage it while you are removing it.
  • Follow the instructions carefully. If you are not familiar with how to remove the governor, follow the instructions carefully to avoid making a mistake.
  • Have a qualified technician do it for you. If you are not comfortable working on your golf cart, you should have a qualified technician do it for you.

By following these safety precautions, you can help to avoid injury and damage to your golf cart.

How do I take off a governor on a golf cart?

1. Locate the governor. The governor is a small device that is typically located on the engine or transmission. It is usually a black box with a wire or two attached to it.
2. Disconnect the battery. This will prevent the engine from starting while you are working on it.
3. Remove the governor. The governor is usually held in place by a few screws or bolts. Once you have removed the screws or bolts, you can carefully remove the governor from the engine or transmission.
4. Reinstall the battery. Now that the governor has been removed, you can reinstall the battery.
5. Test the golf cart. Start the golf cart and make sure that the governor is no longer engaged. The golf cart should now be able to accelerate to its full speed.

What are the risks of removing a governor on a golf cart?

There are a few risks associated with removing a governor on a golf cart. First, if the governor is not removed properly, it could damage the engine or transmission. Second, removing the governor could make the golf cart more dangerous to operate, as it could accelerate to a speed that is unsafe for the driver.

Is it legal to remove a governor on a golf cart?

The legality of removing a governor on a golf cart varies from state to state. In some states, it is illegal to remove the governor on a golf cart, while in other states, it is legal as long as the golf cart is not being used on a public road. It is important to check the laws in your state before removing the governor on your golf cart.

What are the benefits of removing a governor on a golf cart?

There are a few benefits to removing a governor on a golf cart. First, it can increase the top speed of the golf cart. Second, it can make the golf cart more responsive to the accelerator pedal. Third, it can make the golf cart more fun to drive.

What are the drawbacks of removing a governor on a golf cart?

There are a few drawbacks to removing a governor on a golf cart. First, it could damage the engine or transmission if it is not removed properly. Second, it could make the golf cart more dangerous to operate, as it could accelerate to a speed that is unsafe for the driver. Third, it could make the golf cart illegal to operate on public roads.

How much does it cost to remove a governor on a golf cart?

The cost of removing a governor on a golf cart varies depending on the type of golf cart and the mechanic who is doing the work. The average cost is between $100 and $200.

Can I remove the governor myself?

It is possible to remove the governor on a golf cart yourself, but it is important to be careful and to follow the instructions carefully. If you are not comfortable working on your golf cart, it is best to have a mechanic do the work for you.

In this blog post, we have discussed how to take off a governor on a golf cart. We have provided a step-by-step guide, as well as some tips and tricks. We hope that this information has been helpful to you. If you have any further questions, please do not hesitate to contact us.

Here are some key takeaways from this blog post:

  • A governor is a device that limits the speed of a golf cart.
  • There are two types of governors: mechanical and electronic.
  • Mechanical governors are typically located on the engine, while electronic governors are located on the computer.
  • To take off a governor, you will need to find the governor and remove it.
  • The exact location of the governor will vary depending on the make and model of your golf cart.
  • If you are not comfortable removing the governor yourself, you can take your golf cart to a qualified mechanic.

Author Profile

Matthew Woods
Matthew Woods
Hello, fellow golf enthusiasts! I’m Matthew Woods, the founder of GolfPGAChampionship.com.

My journey with golf is a story of passion, perseverance, and a little twist of fate. Growing up in the picturesque town of Charleston, South Carolina, I found myself captivated by golf, a fascination that was partly kindled by sharing a last name with the legendary Tiger Woods.

This platform is more than just a website; it’s a culmination of my life’s experiences in golf. Here, I share in-depth analyses of PGA championships, personal anecdotes from my golfing journey, and tips for golfers at all levels. My aim? To make golf accessible and enjoyable for everyone, from eager beginners to seasoned players.

GolfPGAChampionship.com is a testament to my belief that golf is not just a sport, but a journey filled with learning, challenges, and personal growth. I invite you to join me in this journey, to explore the beautiful game of golf through my eyes and experiences.

Welcome to GolfPGAChampionship.com – let’s make every swing count!