How to Make Custom Golf Cart Seat Covers with Towels

AvatarByMatthew Woods How To Guides

How to Make Golf Cart Seat Covers Out of Towels

Do you have a golf cart that you use to get around the course? If so, you know how important it is to keep the seats clean and protected. Golf carts can get dirty quickly, especially if you’re playing on a course with a lot of sand or mud. One way to keep your seats clean is to make your own seat covers out of towels.

Towels are a great material for golf cart seat covers because they’re absorbent, durable, and easy to clean. You can make seat covers out of any type of towel, but terrycloth towels are a good option because they’re soft and absorbent.

Making golf cart seat covers out of towels is a simple project that you can do in just a few minutes. Plus, it’s a great way to upcycle old towels that you no longer need.

In this article, I’ll show you how to make golf cart seat covers out of towels. I’ll provide step-by-step instructions and photos, so you can follow along easily. I’ll also give you some tips on how to make your seat covers last longer.

So if you’re ready to learn how to make golf cart seat covers out of towels, read on!

“`html

Step Materials Instructions
1 2 towels
  1. Cut each towel in half lengthwise.
  2. Fold each half in half lengthwise again.
  3. Sew the two folded edges together, leaving a 2-inch opening at the bottom.
2 Thread
  1. Thread a needle with a long piece of thread.
  2. Starting at the top of the seat cover, sew a running stitch around the edge, leaving a 2-inch opening at the bottom.
  3. Tie the ends of the thread together.
3 Iron
  1. Iron the seat covers flat.

“`

Materials and Tools

To make golf cart seat covers out of towels, you will need the following materials and tools:

  • 2 bath towels
  • Scissors
  • Needle and thread
  • Fabric glue
  • Iron
  • Tape measure

Instructions

To make golf cart seat covers out of towels, follow these steps:

1. Measure the seats of your golf cart. You will need to know the width and length of each seat in order to cut your towels to the correct size.
2. Cut two pieces of towel to the same size as the seats of your golf cart. Make sure to leave enough extra fabric around the edges to allow for seam allowances.
3. Sew the two pieces of towel together along the edges, using a 1/2-inch seam allowance. Leave a 6-inch opening on one side of the covers for turning.
4. Turn the covers right side out. Use a point turner or other blunt object to help push out the corners.
5. Press the covers flat. Be sure to press the seams open.
6. Sew the opening closed. Use a ladder stitch or other invisible stitch to close the opening.
7. Apply fabric glue to the edges of the covers. This will help to prevent the covers from fraying.
8. Iron the covers to set the glue.

Your golf cart seat covers are now complete!

Tips

Here are a few tips for making golf cart seat covers out of towels:

  • Use towels that are a little bit larger than the seats of your golf cart. This will allow for some extra fabric to bunch up and create a more comfortable fit.
  • If you want to add a little bit of extra style to your covers, you can add piping or trim around the edges.
  • You can also use different colors or patterns of towels to create a unique look for your golf cart.

Making golf cart seat covers out of towels is a simple and inexpensive way to add a touch of style to your golf cart. With just a few materials and tools, you can create custom covers that will keep you comfortable and stylish on the course.

Materials

  • 2 bath towels
  • Fabric scissors
  • Sewing machine and thread
  • Iron and ironing board
  • Safety pins

Instructions

1. Cut the towels to size. You will need to cut each towel in half lengthwise. This will give you two pieces of fabric that are each 24 inches wide by 36 inches long.
2. Sew the towels together. With right sides together, sew the two pieces of fabric together along the long edges. Leave a 1-inch seam allowance.
3. Turn the covers right side out. Carefully turn the covers right side out, using a point turner or other blunt object to help push out the corners.
4. Press the covers. Press the covers flat, making sure to press the seams open.
5. Hem the edges of the covers. Fold the raw edges of the covers 1/2 inch inward and press. Fold them again 1/2 inch inward and press. Stitch the hems in place.
6. Add ties to the covers. Cut two 12-inch pieces of ribbon. Fold each piece of ribbon in half and press. Stitch the folded edges together to create a loop. Pin a loop to each corner of the covers. Stitch the loops in place.

Tips and Tricks

  • To make the covers more durable, you can use a heavier weight fabric, such as terry cloth.
  • If you don’t have a sewing machine, you can also make the covers by hand. Just follow the same steps, but sew the seams with a needle and thread.
  • You can add any other embellishments you like to the covers, such as buttons, lace, or appliques.
  • To keep the covers in place, you can also add Velcro to the inside of the covers and to the golf cart seats.

Troubleshooting

  • If the covers are too big, you can trim them down to size.
  • If the covers are too small, you can add a piece of fabric to the bottom of the covers.
  • If the covers are not fitting snugly around the seats, you can add some elastic to the bottom of the covers.
  • If the covers are bunching up, you can try ironing them flat.

Making golf cart seat covers out of towels is a simple and inexpensive way to protect your seats from the elements. With a few basic materials and tools, you can create custom-made covers that will keep your golf cart looking its best.

How to Make Golf Cart Seat Covers Out of Towels?

Q: What materials do I need?

A: You will need:

  • 2 bath towels
  • 2 washcloths
  • Fabric glue
  • Scissors
  • Tape measure
  • Pencil
  • Pins

Q: What is the process for making golf cart seat covers?

A: 1. Measure the seats. Use a tape measure to measure the width and length of each seat.
2. Cut the towels. Cut each bath towel in half lengthwise. You will now have four pieces of fabric.
3. Fold the towels. Fold each piece of fabric in half lengthwise, so that the short ends are together.
4. Sew the towels together. Use a sewing machine or needle and thread to sew the towels together along the long edges. Leave a 1-inch seam allowance.
5. Turn the covers right side out. Carefully turn the covers right side out, using a point turner or other blunt object to help push out the corners.
6. Press the covers. Press the covers flat with an iron.
7. Glue the washcloths to the covers. Place a washcloth on each seat cover, with the hemmed edges facing up. Apply fabric glue to the back of the washcloths and press them into place.
8. Let the glue dry. Allow the glue to dry completely before using the covers.

Q: How do I clean the covers?

A: The covers can be machine washed and dried on a gentle cycle.

Q: Can I make these covers for other types of seats?

A: Yes, you can use this same method to make seat covers for any type of seat. Just be sure to measure the seats before cutting the fabric.

Q: These covers look great! Thanks for the tutorial.

You’re welcome! I’m glad I could help.

In this tutorial, we have shown you how to make golf cart seat covers out of towels. We hope you found this tutorial helpful and that you are able to create your own custom seat covers for your golf cart.

Here are the key takeaways from this tutorial:

  • Golf cart seat covers can be made out of old towels.
  • To make the covers, you will need to cut the towels to the desired size and then sew them together.
  • You can add embellishments to the covers, such as fringe or piping, to personalize them.
  • Golf cart seat covers can protect your seats from wear and tear, and they can also add a stylish touch to your golf cart.

We hope you enjoy your new golf cart seat covers!

Author Profile

Matthew Woods
Matthew Woods
Hello, fellow golf enthusiasts! I’m Matthew Woods, the founder of GolfPGAChampionship.com.

My journey with golf is a story of passion, perseverance, and a little twist of fate. Growing up in the picturesque town of Charleston, South Carolina, I found myself captivated by golf, a fascination that was partly kindled by sharing a last name with the legendary Tiger Woods.

This platform is more than just a website; it’s a culmination of my life’s experiences in golf. Here, I share in-depth analyses of PGA championships, personal anecdotes from my golfing journey, and tips for golfers at all levels. My aim? To make golf accessible and enjoyable for everyone, from eager beginners to seasoned players.

GolfPGAChampionship.com is a testament to my belief that golf is not just a sport, but a journey filled with learning, challenges, and personal growth. I invite you to join me in this journey, to explore the beautiful game of golf through my eyes and experiences.

Welcome to GolfPGAChampionship.com – let’s make every swing count!