How to Adjust the Governor on a Golf Cart (Step-by-Step Guide)

AvatarByMatthew Woods How To Guides

How to Adjust the Governor on a Golf Cart

Golf carts are a convenient way to get around the course, but they can also be a bit of a handful if they’re not properly adjusted. One of the most important things to get right is the governor, which controls the maximum speed of the cart. If the governor is set too high, the cart will be dangerous to drive. If it’s set too low, the cart will be slow and underpowered.

In this article, we’ll show you how to adjust the governor on a golf cart. We’ll cover the basics of how the governor works, and we’ll give you step-by-step instructions on how to adjust it. By the end of this article, you’ll be able to safely and efficiently adjust the governor on your golf cart.

Step Action Notes
1 Locate the governor on your golf cart. The governor is a small device located on the engine. It is usually a black box with a red button on it.
2 Press the red button on the governor. This will cause the governor to disengage.
3 Turn the governor screw clockwise to increase the speed limit. Turn the screw counterclockwise to decrease the speed limit.
4 Test the speed limit of your golf cart. Make sure that the golf cart does not exceed the desired speed limit.

How To Adjust The Governor On A Golf Cart?

Tools and Materials

To adjust the governor on a golf cart, you will need the following tools and materials:

  • A Phillips head screwdriver
  • A flathead screwdriver
  • A torque wrench
  • A new governor spring (if needed)
  • A new governor weight (if needed)

Locating the Governor

The governor is located on the engine of the golf cart. It is a small, metal device that is attached to the throttle linkage.

To locate the governor, follow these steps:

1. Start by locating the engine of the golf cart.
2. The governor is located on the top of the engine, near the carburetor.
3. It is a small, metal device that is attached to the throttle linkage.

Adjusting the Governor

To adjust the governor, follow these steps:

1. Turn off the engine of the golf cart.
2. Locate the governor spring and governor weight.
3. The governor spring is a small, metal spring that is located on the top of the governor.
4. The governor weight is a small, metal weight that is attached to the bottom of the governor.
5. Use a Phillips head screwdriver to loosen the locknut on the governor spring.
6. Use a flathead screwdriver to turn the governor weight clockwise to increase the speed limit or counterclockwise to decrease the speed limit.
7. Once you have reached the desired speed limit, tighten the locknut on the governor spring.
8. Start the engine of the golf cart and test the speed limit.

Adjusting the governor on a golf cart is a relatively simple task that can be completed by most DIYers. By following these steps, you can ensure that your golf cart is running at its optimal speed.

Here are some additional tips for adjusting the governor on a golf cart:

  • If you are not comfortable working on your golf cart, it is best to have a qualified technician perform the adjustment.
  • Make sure to tighten the locknut on the governor spring securely once you have finished adjusting the speed limit.
  • If you are replacing the governor spring or governor weight, make sure to use the correct replacement parts.
  • Test the speed limit of your golf cart after you have made any adjustments to the governor.

Adjusting the Governor

The governor on a golf cart is a device that limits the speed of the cart. It is typically located on the engine and is adjusted by turning a screw or bolt.

To adjust the governor, you will need to:

1. Locate the governor on the engine. It is typically a small, metal device with a screw or bolt in the center.
2. Turn the screw or bolt clockwise to increase the speed of the cart, or counterclockwise to decrease the speed.
3. Test the cart to make sure the governor is adjusted correctly.

Here are some tips for adjusting the governor:

  • Make small adjustments at a time. It is easy to over-adjust the governor, so it is best to start with small changes.
  • Test the cart after each adjustment. This will help you to determine if the governor is adjusted correctly.
  • If you are not comfortable adjusting the governor yourself, you can take your golf cart to a qualified mechanic.

Testing the Governor

Once you have adjusted the governor, you will need to test it to make sure it is working properly. To test the governor, you will need to:

1. Start the golf cart and let it warm up for a few minutes.
2. Drive the cart at a slow speed.
3. Accelerate the cart to full speed.
4. Listen for the governor to engage. The governor should engage at a specific speed, which is typically between 15 and 20 miles per hour.
5. If the governor does not engage, or if it engages at the wrong speed, you will need to adjust it again.

Here are some tips for testing the governor:

  • Make sure the golf cart is in good condition before you test the governor.
  • Test the governor in a safe environment.
  • Be careful not to accelerate the cart too quickly.
  • If you are not comfortable testing the governor yourself, you can take your golf cart to a qualified mechanic.

Adjusting the governor on a golf cart is a relatively simple task, but it is important to do it correctly. By following the steps in this guide, you can safely and easily adjust the governor on your golf cart.

How do I adjust the governor on a golf cart?

1. Locate the governor. The governor is a small device located on the engine of the golf cart. It is usually a black box with a few wires attached to it.
2. Turn off the engine. Make sure the engine is off before you begin adjusting the governor.
3. Disconnect the battery. Disconnect the battery to prevent the engine from starting accidentally while you are adjusting the governor.
4. Locate the adjustment screw. The adjustment screw is usually located on the side of the governor. It is a small, Phillips-head screw.
5. Turn the adjustment screw. Turn the adjustment screw clockwise to increase the speed limit, or counterclockwise to decrease the speed limit.
6. Reconnect the battery. Reconnect the battery and start the engine.
7. Test the speed limit. Drive the golf cart around and test the speed limit. Make sure the speed limit is set to the desired setting.

What is the purpose of the governor on a golf cart?

The governor on a golf cart limits the speed of the cart to a safe and legal speed. This prevents the cart from going too fast and causing an accident.

What happens if I adjust the governor too much?

If you adjust the governor too much, the cart may go too fast and be unsafe to drive. It is important to adjust the governor only to the desired speed limit.

What happens if I adjust the governor too little?

If you adjust the governor too little, the cart may not be able to reach the desired speed. It is important to adjust the governor so that the cart can reach the desired speed limit.

Can I adjust the governor myself?

Yes, you can adjust the governor yourself. However, it is important to follow the instructions carefully to avoid damaging the governor. If you are not comfortable adjusting the governor yourself, you can take the golf cart to a qualified mechanic.

In this blog post, we have discussed how to adjust the governor on a golf cart. We have covered the different types of governors, the steps involved in adjusting the governor, and the tools and materials you will need. We hope that this information has been helpful and that you are now able to adjust the governor on your golf cart.

Here are some key takeaways from this blog post:

  • The governor is a device that limits the speed of a golf cart.
  • There are two main types of governors: mechanical and electronic.
  • To adjust the governor, you will need to locate the governor on your golf cart, remove the governor cover, and turn the governor screw clockwise or counterclockwise to increase or decrease the speed, respectively.
  • Be sure to follow the manufacturer’s instructions when adjusting the governor.
  • If you are not comfortable adjusting the governor yourself, you can take your golf cart to a qualified technician.

Author Profile

Matthew Woods
Matthew Woods
Hello, fellow golf enthusiasts! I’m Matthew Woods, the founder of GolfPGAChampionship.com.

My journey with golf is a story of passion, perseverance, and a little twist of fate. Growing up in the picturesque town of Charleston, South Carolina, I found myself captivated by golf, a fascination that was partly kindled by sharing a last name with the legendary Tiger Woods.

This platform is more than just a website; it’s a culmination of my life’s experiences in golf. Here, I share in-depth analyses of PGA championships, personal anecdotes from my golfing journey, and tips for golfers at all levels. My aim? To make golf accessible and enjoyable for everyone, from eager beginners to seasoned players.

GolfPGAChampionship.com is a testament to my belief that golf is not just a sport, but a journey filled with learning, challenges, and personal growth. I invite you to join me in this journey, to explore the beautiful game of golf through my eyes and experiences.

Welcome to GolfPGAChampionship.com – let’s make every swing count!