How to Build a DIY Disc Golf Basket for Under $50

AvatarByMatthew Woods How To Guides

How to Make a Disc Golf Basket

Disc golf is a challenging and rewarding sport that can be enjoyed by people of all ages. If you’re looking for a new way to get active and have some fun, consider building your own disc golf basket. This project is relatively simple and can be completed in a few hours with some basic tools and materials.

In this article, we’ll walk you through the steps of building a disc golf basket. We’ll provide detailed instructions and tips, so you can be sure that your finished product is both functional and stylish. So what are you waiting for? Get started on your own disc golf basket today!

Step Materials Instructions
1
  • 2x4s
  • Plywood
  • Duct tape
  • PVC pipe
  • Cable ties
  • Chain
  1. Cut the 2x4s into the following lengths:
    • 4 pieces at 24 inches long
    • 4 pieces at 30 inches long
    • 2 pieces at 36 inches long
  2. Assemble the frame of the basket using the 2x4s and plywood.
  3. Cover the frame with duct tape to protect it from the elements.
  4. Cut the PVC pipe into the following lengths:
    • 4 pieces at 12 inches long
    • 4 pieces at 18 inches long
  5. Attach the PVC pipes to the frame of the basket using cable ties.
  6. Thread the chain through the PVC pipes to create the basket’s chains.
2
  • Spray paint
  • Foam brush
  1. Spray paint the basket in your desired color.
  2. Let the paint dry completely.
3
  • Disk golf discs
  1. Use your new disk golf basket to practice your disc golf skills!

Materials Needed

To make a disk golf basket, you will need the following materials:

  • 2x4s (4)
  • 2x6s (4)
  • 1x4s (4)
  • 2x2s (4)
  • Galvanized pipe (10 feet)
  • PVC pipe (10 feet)
  • Chain (10 feet)
  • Hooks (4)
  • Eye screws (4)
  • Nuts and bolts
  • Wood screws
  • Sandpaper
  • Stain or paint

Steps

1. Cut the wood.

Cut the 2x4s, 2x6s, and 1x4s to the following lengths:

  • 2x4s: 24 inches long
  • 2x6s: 30 inches long
  • 1x4s: 12 inches long

2. Assemble the frame.

To assemble the frame, you will need to create two frames: the front frame and the back frame.

The front frame is made up of two 2x4s and two 2x6s. The 2x4s should be placed at the top and bottom of the frame, and the 2x6s should be placed in the middle. The 1x4s should be placed at the front and back of the frame, and screwed to the 2x4s and 2x6s.

The back frame is made up of two 2x4s and two 2x6s. The 2x4s should be placed at the top and bottom of the frame, and the 2x6s should be placed in the middle. The 1x4s should be placed at the front and back of the frame, and screwed to the 2x4s and 2x6s.

3. Attach the galvanized pipe.

To attach the galvanized pipe, you will need to drill holes in the 2x4s and 2x6s. The holes should be placed in the following locations:

  • Two holes on the top of the front frame, 12 inches apart
  • Two holes on the bottom of the front frame, 12 inches apart
  • Two holes on the top of the back frame, 12 inches apart
  • Two holes on the bottom of the back frame, 12 inches apart

Once the holes are drilled, you can insert the galvanized pipe into the holes. The galvanized pipe should be long enough to reach from the top of the front frame to the bottom of the back frame.

4. Attach the PVC pipe.

To attach the PVC pipe, you will need to drill holes in the 2x4s and 2x6s. The holes should be placed in the following locations:

  • Two holes on the inside of the front frame, 12 inches apart
  • Two holes on the inside of the back frame, 12 inches apart

Once the holes are drilled, you can insert the PVC pipe into the holes. The PVC pipe should be long enough to reach from the top of the front frame to the bottom of the back frame.

5. Attach the chain.

To attach the chain, you will need to drill holes in the PVC pipe. The holes should be placed in the following locations:

  • Two holes on the top of the PVC pipe, 12 inches apart
  • Two holes on the bottom of the PVC pipe, 12 inches apart

Once the holes are drilled, you can insert the chain into the holes. The chain should be long enough to reach from the top of the front frame to the bottom of the back frame.

6. Attach the hooks.

To attach the hooks, you will need to drill holes in the 2x4s and 2x6s. The holes should be placed in the following locations:

  • Two holes on the front of the front frame, 12 inches apart
  • Two holes on the back of the back frame, 12 inches apart

Once the holes are drilled, you can insert the hooks into the holes. The hooks should be long enough to reach from the top of the front frame to the bottom of the back frame.

7. Attach the eye screws.

To attach the eye screws, you will need to drill holes in the 2x4s and 2x6s. The holes should be placed in the following locations:

  • Two holes on the top of the front frame, 12 inches apart
  • Two holes on the bottom of the front frame

Materials

To make a disk golf basket, you will need the following materials:

  • 2x4s (12)
  • 2x2s (4)
  • Plywood (1 sheet)
  • Galvanized pipe (10 feet)
  • PVC pipe (10 feet)
  • Chain (10 feet)
  • Basket net (1)
  • Screws
  • Wood glue
  • Drill
  • Saw
  • Level
  • Tape measure

Instructions

1. Assemble the frame.

To assemble the frame, you will need to first cut the 2x4s and 2x2s to the following lengths:

  • 2x4s: 24 inches long (4)
  • 2x2s: 12 inches long (4)

Once you have cut the wood to the correct lengths, you can begin assembling the frame. Start by attaching the 24-inch 2x4s to the 12-inch 2x2s using screws. You will need to attach two 24-inch 2x4s to each 12-inch 2×2, creating a square frame.

Once the frame is assembled, you can attach the plywood to the top of the frame using screws.

2. Attach the galvanized pipe.

To attach the galvanized pipe, you will need to first cut the pipe to the following lengths:

  • 10 feet long (4)
  • 3 feet long (2)

Once you have cut the pipe to the correct lengths, you can begin attaching it to the frame. Start by attaching the 10-foot pieces of pipe to the corners of the frame. You will need to attach two 10-foot pieces of pipe to each corner, creating a square frame.

Next, attach the 3-foot pieces of pipe to the center of each side of the frame. You will need to attach one 3-foot piece of pipe to each side, creating a cross-shaped frame.

3. Attach the PVC pipe.

To attach the PVC pipe, you will need to first cut the pipe to the following lengths:

  • 10 feet long (4)
  • 3 feet long (2)

Once you have cut the pipe to the correct lengths, you can begin attaching it to the frame. Start by attaching the 10-foot pieces of pipe to the top of the frame. You will need to attach two 10-foot pieces of pipe to each side, creating a square frame.

Next, attach the 3-foot pieces of pipe to the bottom of the frame. You will need to attach one 3-foot piece of pipe to each side, creating a cross-shaped frame.

4. Attach the chain.

To attach the chain, you will need to first cut the chain to the following lengths:

  • 10 feet long (4)
  • 3 feet long (2)

Once you have cut the chain to the correct lengths, you can begin attaching it to the frame. Start by attaching the 10-foot pieces of chain to the top of the frame. You will need to attach two 10-foot pieces of chain to each side, creating a square frame.

Next, attach the 3-foot pieces of chain to the bottom of the frame. You will need to attach one 3-foot piece of chain to each side, creating a cross-shaped frame.

5. Attach the basket net.

To attach the basket net, you will need to first cut the net to the following dimensions:

  • 36 inches wide
  • 36 inches deep

Once you have cut the net to the correct dimensions, you can begin attaching it to the frame. Start by attaching the net to the top of the frame. You will need to attach the net to all four sides of the frame, creating a square frame.

Next, attach the net to the bottom of the frame. You will need to attach the net to all four sides of the frame, creating a square frame.

6. Paint the basket.

Once the basket is assembled, you can paint it to your desired color. You can use any type of paint that you like, but we recommend using a durable paint that will withstand the elements.

Tips

Here are a few tips for making a disk golf basket:

  • Use quality materials. The best way to ensure that your disk golf basket will last is to use quality materials. Make sure that the wood is strong

    How To Make Disk Golf Basket?

Q: What materials do I need to make a disk golf basket?

A: You will need the following materials:

  • 2x4s (10)
  • 2x2s (4)
  • Plywood (1 sheet)
  • Galvanized pipe (10 feet)
  • PVC pipe (10 feet)
  • Chain (10 feet)
  • Hooks (10)
  • Nuts and bolts
  • Wood screws
  • Drill
  • Saw
  • Measuring tape
  • Level
  • Pencil

Q: What are the steps involved in making a disk golf basket?

A: The steps involved in making a disk golf basket are as follows:

1. Cut the 2x4s into the following lengths:

  • 4 pieces at 24 inches long
  • 4 pieces at 30 inches long
  • 2 pieces at 36 inches long

2. Cut the 2x2s into the following lengths:

  • 4 pieces at 24 inches long
  • 4 pieces at 30 inches long

3. Cut the plywood into the following dimensions:

  • 1 piece at 24 inches by 30 inches
  • 1 piece at 36 inches by 30 inches

4. Assemble the frame of the basket by attaching the 2x4s and 2x2s together with wood screws.

5. Attach the plywood to the frame of the basket with wood screws.

6. Cut the galvanized pipe into the following lengths:

  • 4 pieces at 24 inches long
  • 4 pieces at 30 inches long

7. Attach the galvanized pipe to the frame of the basket with galvanized pipe fittings.

8. Cut the PVC pipe into the following lengths:

  • 4 pieces at 24 inches long
  • 4 pieces at 30 inches long

9. Attach the PVC pipe to the galvanized pipe with PVC pipe fittings.

10. Attach the chain to the PVC pipe with hooks.

11. Level the basket and secure it to the ground.

Q: What are some tips for making a disk golf basket?

A: Here are some tips for making a disk golf basket:

  • Use sturdy materials that will withstand the elements.
  • Make sure the basket is level and secure.
  • Use a variety of colors and materials to make the basket attractive.
  • Add your own personal touches to make the basket unique.

Q: What are some common mistakes people make when making a disk golf basket?

A: Here are some common mistakes people make when making a disk golf basket:

  • Using flimsy materials that will not withstand the elements.
  • Not making sure the basket is level and secure.
  • Using a single color or material for the basket.
  • Not adding any personal touches to the basket.

Q: What are some resources available to help me make a disk golf basket?

A: There are a number of resources available to help you make a disk golf basket, including:

  • Online tutorials
  • Books
  • Magazines
  • Blogs
  • YouTube videos

You can also find helpful information and advice from other disk golf enthusiasts.

In this blog post, we have discussed how to make a disk golf basket. We started by discussing the materials and tools you will need. Then, we walked you through the steps of building the basket, from cutting the wood to assembling the pieces. Finally, we gave you some tips on how to make your basket look and perform its best.

We hope this blog post has been helpful. If you have any questions, please feel free to leave them in the comments below. And be sure to check out our other blog posts for more DIY projects and tips.

Here are some key takeaways from this blog post:

  • To make a disk golf basket, you will need 2x4s, plywood, screws, and a drill.
  • The first step is to cut the wood to the correct size.
  • Then, you will need to assemble the pieces of the basket.
  • Finally, you will need to paint the basket and attach the chains.

By following these steps, you can easily make your own disk golf basket. This is a great project for anyone who loves to play disk golf or who wants to add a new DIY project to their list.

Author Profile

Matthew Woods
Matthew Woods
Hello, fellow golf enthusiasts! I’m Matthew Woods, the founder of GolfPGAChampionship.com.

My journey with golf is a story of passion, perseverance, and a little twist of fate. Growing up in the picturesque town of Charleston, South Carolina, I found myself captivated by golf, a fascination that was partly kindled by sharing a last name with the legendary Tiger Woods.

This platform is more than just a website; it’s a culmination of my life’s experiences in golf. Here, I share in-depth analyses of PGA championships, personal anecdotes from my golfing journey, and tips for golfers at all levels. My aim? To make golf accessible and enjoyable for everyone, from eager beginners to seasoned players.

GolfPGAChampionship.com is a testament to my belief that golf is not just a sport, but a journey filled with learning, challenges, and personal growth. I invite you to join me in this journey, to explore the beautiful game of golf through my eyes and experiences.

Welcome to GolfPGAChampionship.com – let’s make every swing count!