How to Remove a Golf Cart Governor: A Step-by-Step Guide

How to Remove a Golf Cart Governor

If you’re looking to improve the performance of your golf cart, one of the easiest and most effective things you can do is remove the governor. The governor is a device that limits the speed of the cart, and by removing it, you can free up the engine to reach its full potential.

Removing a golf cart governor is a relatively simple task, but it does require some basic mechanical skills. In this article, we’ll walk you through the process step-by-step. We’ll also provide some tips on how to safely and effectively remove the governor without damaging your cart.

So if you’re ready to give your golf cart a performance boost, read on!

Step	Instructions	Image
1	Locate the governor on your golf cart. It is a small, black box located near the engine.
2	Remove the two screws that hold the governor in place.
3	Disconnect the wires from the governor.
4	Remove the governor from the golf cart.

How to Remove a Golf Cart Governor

Tools and Materials Needed

• 10mm socket wrench
• 12mm socket wrench
• Pliers
• Flathead screwdriver
• Penetrating oil

Step-by-Step Instructions

1. Locate the governor. The governor is a small, metal device located on the engine of your golf cart. It is usually located near the carburetor.
2. Remove the governor clamp. The governor clamp is a metal bracket that holds the governor in place. It is usually secured with a 10mm bolt. Use a 10mm socket wrench to loosen and remove the bolt.
3. Remove the governor spring. The governor spring is a small, metal spring that connects the governor to the engine. It is usually secured with a 12mm bolt. Use a 12mm socket wrench to loosen and remove the bolt.
4. Remove the governor arm. The governor arm is a metal rod that connects the governor to the carburetor. It is usually secured with a 10mm bolt. Use a 10mm socket wrench to loosen and remove the bolt.

Once you have removed all of the bolts, the governor should be free to be removed. Be careful not to damage the governor or the engine when removing it.

Removing the governor from a golf cart is a relatively simple task. However, it is important to follow the steps carefully to avoid damaging the governor or the engine. If you are not comfortable working on your golf cart, it is best to have a qualified technician do the job for you.

Troubleshooting

If you are having trouble removing the governor from your golf cart, there are a few things you can check.

• Make sure you have the right tools. You will need a wrench or socket set, a screwdriver, and a pry bar.
• Locate the governor. The governor is usually located on the engine, near the carburetor. It is a small, metal device that regulates the speed of the engine.
• Disconnect the battery. Before you start working on the governor, disconnect the battery to prevent any electrical problems.
• Remove the governor mounting bolts. The governor is usually held in place by two or three bolts. Use a wrench or socket set to remove the bolts.
• Pry the governor off the engine. Once the bolts are removed, you can pry the governor off the engine using a screwdriver or pry bar. Be careful not to damage the engine.
• Reinstall the governor. Once you have removed the governor, you can reinstall it by following the steps above in reverse.

If you are still having trouble removing the governor, you may need to take your golf cart to a qualified mechanic.

Tips and Tricks

Here are a few tips and tricks to help you remove the governor from your golf cart:

• Use penetrating oil. If the bolts are stuck, you can try applying penetrating oil to them before you try to remove them. This will help to loosen the bolts and make them easier to remove.
• Use a heat gun. If the bolts are really stuck, you can try using a heat gun to heat them up. This will help to expand the metal and make the bolts easier to remove.
• Use a hammer. If the bolts are still stuck, you can try tapping them with a hammer to loosen them. Be careful not to damage the bolts or the engine.
• Take your golf cart to a mechanic. If you are still having trouble removing the governor, you may need to take your golf cart to a qualified mechanic.

By following these tips and tricks, you can remove the governor from your golf cart without any trouble.

How do I remove the governor on a golf cart?

1. Locate the governor. The governor is a small device that is typically located on the engine of the golf cart. It is usually a black box with a wire connected to it.
2. Turn off the engine and disconnect the battery. This will prevent the engine from starting while you are working on it.
3. Remove the governor cover. The governor cover is usually a small metal plate that is held in place by a few screws. Remove the screws and set the cover aside.
4. Disconnect the governor wire. The governor wire is usually a small black wire that is connected to the governor. Disconnect the wire by carefully pulling it off of the connector.
5. Remove the governor. The governor is usually held in place by a few bolts. Remove the bolts and carefully remove the governor from the engine.
6. Reinstall the governor cover and reconnect the battery. Once the governor has been removed, reinstall the governor cover and reconnect the battery.

What are the symptoms of a bad governor?

• The golf cart will not accelerate past a certain speed.
• The golf cart will hesitate when accelerating.
• The golf cart will make a loud noise when accelerating.
• The golf cart will lose power when accelerating.

How can I prevent a governor from going bad?

• Keep the engine well-maintained.
• Avoid running the engine at high speeds for extended periods of time.
• Inspect the governor regularly for signs of wear and tear.
• Replace the governor if it is damaged or worn out.

What are the risks of removing the governor from a golf cart?

• The golf cart may accelerate too quickly, which could be dangerous.
• The golf cart may lose power, which could make it difficult to control.
• The golf cart may emit more exhaust fumes, which could be harmful to the environment.

Is it legal to remove the governor from a golf cart?

The legality of removing the governor from a golf cart varies from state to state. In some states, it is illegal to remove the governor from a golf cart without a permit. In other states, it is legal to remove the governor from a golf cart as long as the golf cart is not used on public roads. It is important to check the laws in your state before removing the governor from your golf cart.

In this blog post, we have discussed how to remove a golf cart governor. We first explained what a governor is and why it is important. We then provided step-by-step instructions on how to remove a governor from a golf cart. Finally, we discussed the pros and cons of removing a governor.

We hope that this blog post has been helpful. If you have any questions, please feel free to leave a comment below.

Here are some key takeaways from this blog post:

• A governor is a device that limits the speed of a golf cart.
• There are two types of governors: mechanical and electronic.
• Mechanical governors are typically easier to remove than electronic governors.
• Removing a governor can increase the speed of your golf cart, but it can also make it unsafe to drive.
• It is important to weigh the pros and cons of removing a governor before making a decision.