How To Remove Governor From Golf Cart?

AvatarByMatthew Woods How To Guides

How to Remove the Governor from a Golf Cart

If you’re looking for a way to increase the speed of your golf cart, you may be wondering how to remove the governor. The governor is a device that limits the speed of the cart by controlling the fuel flow to the engine. By removing the governor, you can free up the engine and allow it to reach higher speeds.

However, it’s important to note that removing the governor can also void your warranty and make your cart less safe. It’s also important to follow the proper steps when removing the governor, as you could damage your cart if you’re not careful.

In this article, we’ll walk you through the steps on how to remove the governor from a golf cart. We’ll also provide some tips on how to make your cart more safe and reliable after you’ve removed the governor.

So if you’re ready to take your golf cart to the next level, keep reading!

Step Instructions Image
1 Locate the governor on your golf cart. It is usually a small, black box located near the engine.
2 Disconnect the battery cables from the golf cart. This will prevent the engine from starting while you are working on it.
3 Remove the screws that hold the governor in place. Once the screws are removed, you can carefully pry the governor off of the engine.
4 Reinstall the battery cables and start the golf cart. The governor should now be removed.

How To Remove Governor From Golf Cart?

This guide will show you how to remove the governor from a golf cart. The governor is a small metal box located on the engine. It is responsible for limiting the speed of the engine. If you want to increase the speed of your golf cart, you will need to remove the governor.

Tools and Materials Needed

  • Wrench
  • Screwdriver
  • Penetrating oil
  • Safety glasses

Locating the Governor

The governor is a small metal box located on the engine. It is usually near the carburetor or fuel pump.

To locate the governor, you will need to first find the engine. The engine is usually located in the front of the golf cart. Once you have found the engine, look for a small metal box with a hose connected to it. This is the governor.

Removing the Governor

To remove the governor, you will need to first disconnect the hose from the governor. Once the hose is disconnected, you will need to remove the bolts that hold the governor in place. The bolts are usually located on the bottom of the governor.

Once the bolts are removed, you can carefully lift the governor off of the engine. Be careful not to damage any of the other components on the engine.

Installing the New Governor

Installing the new governor is the reverse of removing the old governor. First, you will need to place the new governor on the engine. Once the governor is in place, you will need to install the bolts that hold it in place. Finally, you will need to reconnect the hose to the governor.

Removing the governor from a golf cart is a relatively simple task. However, it is important to follow the steps in this guide carefully to avoid damaging any of the other components on the engine.

Removing the Governor

To remove the governor from a golf cart, you will need the following tools:

  • A wrench
  • A screwdriver
  • A pair of pliers

1. Turn off the engine and allow it to cool down.
2. Locate the governor on the engine. It is a small, cylindrical device with a metal rod that extends into the carburetor.
3. Use the wrench to loosen the bolts that hold the governor in place. There are usually two bolts, one on each side of the governor.
4. Be careful not to damage the wiring. The wiring is usually attached to the governor with a small clip.
5. Remove the governor from the engine.

Reinstalling the Governor

To reinstall the governor, follow these steps:

1. Apply a small amount of penetrating oil to the threads of the bolts. This will help to prevent the bolts from seizing up when you tighten them.
2. Reinstall the governor and tighten the bolts securely. Be careful not to overtighten the bolts, as this could damage the governor.
3. Start the engine and test the governor. The governor should be able to control the engine speed without any problems.

Removing and reinstalling the governor on a golf cart is a relatively simple task. However, it is important to follow the steps carefully to avoid damaging the governor or the engine. If you are not comfortable doing this work, it is best to have a qualified technician do it for you.

How do I remove the governor from my golf cart?

1. Locate the governor. The governor is a small device that is typically located on the engine of the golf cart. It is usually a black box with a wire attached to it.
2. Disconnect the wire from the governor. The wire from the governor is usually connected to the ignition switch. Disconnect the wire by carefully prying it off of the switch.
3. Remove the governor. The governor is usually held in place by a few screws. Remove the screws and carefully remove the governor from the engine.

What are the risks of removing the governor from my golf cart?

There are a few risks associated with removing the governor from your golf cart. First, your golf cart will become faster and more powerful. This can make it more difficult to control, especially at high speeds. Second, removing the governor can void your golf cart’s warranty. Third, removing the governor can increase the risk of engine damage.

Is it legal to remove the governor from my golf cart?

The legality of removing the governor from your golf cart varies from state to state. In some states, it is illegal to remove the governor from a golf cart. In other states, it is legal to remove the governor, but you may need to obtain a permit or license. It is important to check the laws in your state before removing the governor from your golf cart.

What are the benefits of removing the governor from my golf cart?

There are a few benefits to removing the governor from your golf cart. First, your golf cart will become faster and more powerful. This can be a fun and exciting experience. Second, removing the governor can make your golf cart more fuel-efficient. Third, removing the governor can make your golf cart easier to drive.

How much does it cost to remove the governor from my golf cart?

The cost of removing the governor from your golf cart will vary depending on the type of golf cart you have and the mechanic you use. The average cost is between $100 and $200.

Can I remove the governor myself?

It is possible to remove the governor yourself, but it is important to be careful and to follow the instructions carefully. If you are not comfortable working on your golf cart, it is best to have a professional do it for you.

In this blog post, we have discussed how to remove the governor from a golf cart. We have provided a step-by-step guide, as well as some tips and tricks. We hope that this information has been helpful, and that you are now able to remove the governor from your golf cart safely and easily.

Here are some key takeaways from this blog post:

  • The governor is a device that limits the speed of a golf cart.
  • It is located on the engine, and it is usually a small, metal box.
  • To remove the governor, you will need to disconnect the battery, remove the governor cover, and then disconnect the governor from the engine.
  • Once the governor is removed, you can reinstall the governor cover and reconnect the battery.
  • Be sure to follow the steps in this blog post carefully, and use caution when working on your golf cart.

Author Profile

Matthew Woods
Matthew Woods
Hello, fellow golf enthusiasts! I’m Matthew Woods, the founder of GolfPGAChampionship.com.

My journey with golf is a story of passion, perseverance, and a little twist of fate. Growing up in the picturesque town of Charleston, South Carolina, I found myself captivated by golf, a fascination that was partly kindled by sharing a last name with the legendary Tiger Woods.

This platform is more than just a website; it’s a culmination of my life’s experiences in golf. Here, I share in-depth analyses of PGA championships, personal anecdotes from my golfing journey, and tips for golfers at all levels. My aim? To make golf accessible and enjoyable for everyone, from eager beginners to seasoned players.

GolfPGAChampionship.com is a testament to my belief that golf is not just a sport, but a journey filled with learning, challenges, and personal growth. I invite you to join me in this journey, to explore the beautiful game of golf through my eyes and experiences.

Welcome to GolfPGAChampionship.com – let’s make every swing count!