How To Take Governor Off Golf Cart?

AvatarByMatthew Woods How To Guides

How to Take the Governor Off a Golf Cart

Golf carts are a great way to get around a course, but they can be a bit slow. If you’re looking for a way to get a little more speed out of your cart, you may be wondering how to take the governor off.

The governor is a device that limits the speed of a golf cart. It’s usually located on the engine or transmission, and it’s designed to prevent the cart from going too fast.

Taking the governor off a golf cart is not difficult, but it does require some mechanical knowledge. If you’re not comfortable working on your own car, you may want to take your cart to a qualified mechanic.

With that said, here are the steps on how to take the governor off a golf cart:

1. Locate the governor. The governor is usually located on the engine or transmission. It’s a small, cylindrical device with a spring inside.
2. Disconnect the governor. There will be a few wires connected to the governor. Disconnect these wires.
3. Remove the governor. Once the wires are disconnected, you can remove the governor. It’s usually held in place by a few bolts.
4. Reinstall the governor. If you ever want to put the governor back on, you can do so by following these steps in reverse.

Note: Taking the governor off a golf cart can void your warranty. Be sure to read your owner’s manual before proceeding.

Step Action Explanation
1 Locate the governor The governor is a small, black box located on the engine.
2 Remove the governor cover The governor cover is a small, metal plate that is held in place by a few screws.
3 Disconnect the governor wire The governor wire is a small, black wire that connects the governor to the engine.
4 Reinstall the governor cover Replace the governor cover and tighten the screws.
5 Test the golf cart Start the golf cart and let it run for a few minutes.

What is a governor on a golf cart?

A governor is a device that limits the speed of a golf cart. It is typically located on the engine and is either a mechanical or electronic device. Mechanical governors use a spring-loaded arm to physically limit the throttle, while electronic governors use a sensor to monitor the engine speed and cut off the fuel supply if it exceeds a certain limit.

Governors are installed on golf carts for a number of reasons. First, they help to prevent accidents by keeping the cart from going too fast. Second, they can help to extend the life of the engine by preventing it from over-revving. Third, they can help to save fuel by limiting the cart’s top speed.

Why would you want to remove the governor on a golf cart?

There are a few reasons why you might want to remove the governor on a golf cart. First, if you want to go faster, removing the governor will allow you to do so. Second, if you are having trouble with your cart stalling, removing the governor may help to solve the problem. Third, if you are racing your cart, removing the governor will give you an advantage.

However, there are also some risks associated with removing the governor. First, it can make your cart more dangerous to drive. Second, it can damage your engine if you rev it too high. Third, it can void your warranty.

If you are considering removing the governor on your golf cart, you should weigh the risks and benefits carefully before making a decision.

How to remove the governor on a golf cart

Removing the governor on a golf cart is a relatively simple procedure, but it does require some basic mechanical skills. The following steps will walk you through the process:

1. Locate the governor. The governor is typically located on the engine, near the throttle. It may be a mechanical or electronic device.
2. Disconnect the battery. This will prevent the engine from starting while you are working on it.
3. Remove the governor. The specific steps for removing the governor will vary depending on the type of governor you have. For a mechanical governor, you will need to remove the spring-loaded arm. For an electronic governor, you will need to disconnect the sensor and the fuel supply.
4. Reconnect the battery.
5. Test the cart. Start the cart and let it run for a few minutes. Make sure that the cart is running smoothly and that the governor is not limiting the speed.

If you have any questions about removing the governor on your golf cart, you should consult with a qualified mechanic.

Removing the governor on a golf cart can be a dangerous and risky procedure. It is important to weigh the risks and benefits carefully before making a decision. If you do decide to remove the governor, be sure to follow the steps in this guide carefully.

3. How to remove the governor on a golf cart (steps)

1. Locate the governor. The governor is a small device that is usually located on the engine of the golf cart. It is a metal or plastic cap that has a small hole in the center.
2. Remove the governor cap. Use a small screwdriver or pliers to pry off the governor cap. Be careful not to damage the governor.
3. Disconnect the governor wire. The governor wire is a small wire that connects the governor to the engine. It is usually located near the governor cap. Use a pair of pliers to disconnect the wire.
4. Remove the governor. The governor is now free to be removed. Use a pair of pliers to grip the governor and pull it off of the engine.
5. Reinstall the governor cap and wire. Once the governor is removed, reinstall the governor cap and wire. Make sure that the cap is securely tightened and the wire is properly connected.

4. Safety precautions when removing the governor on a golf cart

When removing the governor on a golf cart, it is important to take the following safety precautions:

  • Turn off the engine and disconnect the battery. This will prevent the engine from starting up while you are working on it.
  • Use gloves and eye protection. This will protect your hands and eyes from any sharp objects or flying debris.
  • Be careful not to damage the governor. The governor is a delicate device and can be easily damaged if you are not careful.
  • Follow the steps in the instructions carefully. This will help you to remove the governor safely and correctly.

By following these safety precautions, you can safely remove the governor on a golf cart.

How do I take the governor off a golf cart?

There are a few different ways to remove the governor from a golf cart. The most common way is to use a screwdriver to pry off the governor cover. Once the cover is removed, you can use a wrench to loosen the governor bolt and remove it. Another way to remove the governor is to use a grinder to cut off the governor bolt. This is a more difficult and dangerous method, so it is not recommended unless you are experienced with using a grinder.

What are the risks of removing the governor from a golf cart?

There are a few risks associated with removing the governor from a golf cart. First, removing the governor can make the golf cart go faster than it was designed to go. This can increase the risk of accidents. Second, removing the governor can make the golf cart harder to control, especially at high speeds. Third, removing the governor can void the warranty on your golf cart.

Is it legal to remove the governor from a golf cart?

The legality of removing the governor from a golf cart depends on the state you live in. In some states, it is legal to remove the governor, while in other states it is illegal. It is important to check the laws in your state before removing the governor from your golf cart.

How do I put the governor back on a golf cart?

To put the governor back on a golf cart, you will need to reverse the steps you took to remove it. First, you will need to put the governor bolt back in place and tighten it with a wrench. Then, you will need to put the governor cover back on and secure it with a screwdriver.

What are some other ways to increase the speed of a golf cart?

There are a few other ways to increase the speed of a golf cart without removing the governor. One way is to upgrade the tires. Larger, wider tires can provide more traction and allow the golf cart to go faster. Another way to increase speed is to upgrade the engine. A more powerful engine can make the golf cart go faster. Finally, you can also try adding a spoiler to the back of the golf cart. A spoiler can help to reduce drag and allow the golf cart to go faster.

In this blog post, we have discussed how to take the governor off a golf cart. We have provided a step-by-step guide on how to do this safely and effectively. We have also discussed the risks involved in removing the governor and the potential benefits of doing so.

We hope that this blog post has been helpful and that you have found the information you were looking for. If you have any further questions, please do not hesitate to contact us.

Author Profile

Matthew Woods
Matthew Woods
Hello, fellow golf enthusiasts! I’m Matthew Woods, the founder of GolfPGAChampionship.com.

My journey with golf is a story of passion, perseverance, and a little twist of fate. Growing up in the picturesque town of Charleston, South Carolina, I found myself captivated by golf, a fascination that was partly kindled by sharing a last name with the legendary Tiger Woods.

This platform is more than just a website; it’s a culmination of my life’s experiences in golf. Here, I share in-depth analyses of PGA championships, personal anecdotes from my golfing journey, and tips for golfers at all levels. My aim? To make golf accessible and enjoyable for everyone, from eager beginners to seasoned players.

GolfPGAChampionship.com is a testament to my belief that golf is not just a sport, but a journey filled with learning, challenges, and personal growth. I invite you to join me in this journey, to explore the beautiful game of golf through my eyes and experiences.

Welcome to GolfPGAChampionship.com – let’s make every swing count!