How to Remove the Governor on an Electric Golf Cart (Without voiding your warranty)

AvatarByMatthew Woods How To Guides

How to Remove the Governor on an Electric Golf Cart

Electric golf carts are a convenient way to get around the course, but they can be a bit slow. If you’re looking to increase the speed of your cart, you may want to consider removing the governor.

The governor is a device that limits the speed of the cart by controlling the flow of electricity to the motor. By removing the governor, you can free up the motor and allow it to reach its full potential.

Removing the governor is a relatively simple process, but it does require some basic mechanical skills. In this article, we will walk you through the steps of removing the governor on an electric golf cart.

We’ll also provide some tips on how to safely operate your cart at higher speeds. So if you’re ready to take your golf cart to the next level, read on!

Step Instructions Image
1 Locate the governor on your golf cart. It is a small black box usually located near the battery.
2 Remove the two screws that hold the governor in place.
3 Disconnect the wires from the governor.
4 Remove the governor from the golf cart.

A governor is a device that limits the speed of an engine. In an electric golf cart, the governor is typically located on the motor and is used to prevent the cart from going too fast. If you need to remove the governor on your electric golf cart, you can do so by following the steps in this guide.

Tools and Materials Needed

  • Socket wrench
  • Phillips head screwdriver
  • Flathead screwdriver
  • Safety glasses
  • Work gloves

Steps to Remove the Governor

1. Locate the governor. The governor is typically located on the motor, near the flywheel. It is a small, cylindrical device with a metal cap.
2. Disconnect the battery. Before you begin working on the golf cart, disconnect the battery to prevent any electrical hazards.
3. Remove the governor cover. The governor cover is typically held in place by two screws. Use a Phillips head screwdriver to remove the screws and remove the cover.
4. Disconnect the governor wires. The governor is connected to the motor by two wires. Use a flathead screwdriver to disconnect the wires.
5. Remove the governor. The governor is held in place by a bolt. Use a socket wrench to loosen the bolt and remove the governor.
6. Reinstall the governor cover. Reinstall the governor cover and tighten the screws.
7. Reconnect the battery. Reconnect the battery to the golf cart.

By following these steps, you can remove the governor on your electric golf cart. If you have any questions, consult your golf cart owner’s manual or a qualified mechanic.

Here are some additional tips for removing the governor on an electric golf cart:

  • Be careful not to damage the governor when you are removing it.
  • Make sure to disconnect the battery before you begin working on the golf cart.
  • Reconnect the battery only after you have finished reinstalling the governor.
  • If you are not comfortable working on your golf cart, consult a qualified mechanic.

How To Remove The Governor On An Electric Golf Cart?

Step 1: Gather your tools and materials

To remove the governor on an electric golf cart, you will need the following tools and materials:

  • A Phillips head screwdriver
  • A flathead screwdriver
  • A pair of pliers
  • A socket wrench
  • A set of metric sockets
  • A torque wrench
  • A new governor

Step 2: Locate the governor

The governor is a small device that is located on the engine of the golf cart. It is usually a black box with a few wires connected to it.

Step 3: Park the golf cart on a level surface

It is important to park the golf cart on a level surface before you begin removing the governor. This will help to prevent the cart from rolling away while you are working on it.

Step 4: Engage the parking brake

Once the golf cart is parked on a level surface, you will need to engage the parking brake. This will help to prevent the cart from rolling away while you are working on it.

Step 5: Remove the governor cover

The governor cover is a small metal plate that is located on the front of the governor. It is held in place by a few screws. Use a Phillips head screwdriver to remove the screws and take off the cover.

Step 6: Disconnect the wires

There are a few wires connected to the governor. Use a pair of pliers to disconnect the wires. Be careful not to damage the wires.

Step 7: Remove the governor

The governor is now held in place by a few bolts. Use a socket wrench to remove the bolts and take off the governor.

Step 8: Install the new governor

To install the new governor, simply reverse the steps above. Make sure to tighten the bolts securely.

Step 9: Test the golf cart

Once the governor is installed, test the golf cart to make sure that it is working properly.

Removing the governor on an electric golf cart is a relatively simple task. By following these steps, you can safely and easily remove the governor and increase the speed of your golf cart.

Here are some additional tips for removing the governor on an electric golf cart:

  • Be careful not to damage the wires when you are disconnecting them.
  • Make sure to tighten the bolts securely when you are reinstalling the governor.
  • Test the golf cart to make sure that it is working properly before you drive it.

If you have any questions about removing the governor on an electric golf cart, you can consult your owner’s manual or a qualified mechanic.

How do I remove the governor on an electric golf cart?

1. Turn off the power to the golf cart. This will ensure that you are not injured while working on the cart.
2. Locate the governor. The governor is a small device that is typically located on the motor. It is usually a black box with a red button.
3. Press the red button on the governor. This will release the governor from the motor.
4. Remove the governor from the motor. The governor is usually held in place by a few screws. Once the screws are removed, the governor can be lifted off of the motor.
5. Reinstall the governor. If you are reinstalling the governor, be sure to align the holes in the governor with the holes in the motor. Once the holes are aligned, you can reinstall the screws.
6. Turn on the power to the golf cart. The governor is now removed and the golf cart can be used normally.

What are the risks of removing the governor on an electric golf cart?

There are a few risks associated with removing the governor on an electric golf cart. These risks include:

  • Increased speed. Removing the governor will allow the golf cart to go faster than it was designed to go. This can increase the risk of accidents.
  • Loss of control. The golf cart may become more difficult to control at high speeds. This can also increase the risk of accidents.
  • Damage to the golf cart. Removing the governor can damage the golf cart’s motor and other components. This can lead to expensive repairs.

It is important to weigh the risks and benefits of removing the governor before making a decision. If you decide to remove the governor, be sure to do so carefully and follow the instructions in this guide.

Can I remove the governor on my electric golf cart myself?

It is possible to remove the governor on an electric golf cart yourself, but it is important to be careful and follow the instructions in this guide. If you are not comfortable working on your golf cart, you may want to have a qualified technician do the work for you.

What are the benefits of removing the governor on an electric golf cart?

There are a few benefits to removing the governor on an electric golf cart. These benefits include:

  • Increased speed. As mentioned above, removing the governor will allow the golf cart to go faster. This can be a benefit for golfers who want to get around the course faster.
  • More fun. For some golfers, removing the governor can make the golf cart more fun to drive. This is because the golf cart will be able to go faster and will be more responsive to the driver’s inputs.

It is important to note that the benefits of removing the governor come with some risks. These risks are discussed in the previous FAQ.

What are the disadvantages of removing the governor on an electric golf cart?

The disadvantages of removing the governor on an electric golf cart are the same as the risks. These include:

  • Increased speed. This can increase the risk of accidents.
  • Loss of control. The golf cart may become more difficult to control at high speeds. This can also increase the risk of accidents.
  • Damage to the golf cart. Removing the governor can damage the golf cart’s motor and other components. This can lead to expensive repairs.

It is important to weigh the risks and benefits of removing the governor before making a decision. If you decide to remove the governor, be sure to do so carefully and follow the instructions in this guide.

In this blog post, we have discussed how to remove the governor on an electric golf cart. We have provided a step-by-step guide, as well as some tips and tricks to help you along the way. We hope that this information has been helpful, and that you are now able to remove the governor on your own.

Here are a few key takeaways from this blog post:

  • The governor is a device that limits the speed of an electric golf cart.
  • It is located on the motor controller.
  • To remove the governor, you will need to disconnect the battery, remove the motor controller cover, and disconnect the governor wires.
  • Once the governor is removed, you can reconnect the battery and test the cart.

We hope that this information has been helpful, and that you are now able to remove the governor on your own. If you have any questions, please do not hesitate to contact us.

Author Profile

Matthew Woods
Matthew Woods
Hello, fellow golf enthusiasts! I’m Matthew Woods, the founder of GolfPGAChampionship.com.

My journey with golf is a story of passion, perseverance, and a little twist of fate. Growing up in the picturesque town of Charleston, South Carolina, I found myself captivated by golf, a fascination that was partly kindled by sharing a last name with the legendary Tiger Woods.

This platform is more than just a website; it’s a culmination of my life’s experiences in golf. Here, I share in-depth analyses of PGA championships, personal anecdotes from my golfing journey, and tips for golfers at all levels. My aim? To make golf accessible and enjoyable for everyone, from eager beginners to seasoned players.

GolfPGAChampionship.com is a testament to my belief that golf is not just a sport, but a journey filled with learning, challenges, and personal growth. I invite you to join me in this journey, to explore the beautiful game of golf through my eyes and experiences.

Welcome to GolfPGAChampionship.com – let’s make every swing count!