How to Make DIY Golf Cart Seat Covers with Towels

How to Make Golf Cart Seat Covers Out of Towels

Do you have a golf cart that you want to protect from the elements? If so, you may be interested in making your own golf cart seat covers out of towels. This is a relatively simple project that can be completed in just a few hours. Plus, it’s a great way to recycle old towels that you no longer need.

In this article, we will walk you through the steps of making golf cart seat covers out of towels. We’ll provide you with detailed instructions and tips, so you can be sure that your project is a success.

So, if you’re ready to learn how to make golf cart seat covers out of towels, read on!

Step	Materials	Instructions
1	2 bath towels	Cut each towel in half lengthwise. Fold each half in half again lengthwise. Sew the two folded edges together to create a tube.
2	Rubber bands	Place the seat cover over the golf cart seat. Stretch the rubber bands around the seat cover to hold it in place.
3	Optional: fabric paint	Decorate the seat covers with fabric paint if desired.

How To Make Golf Cart Seat Covers Out Of Towels?

Materials and Tools

• 2 bath towels
• Fabric scissors
• Fabric glue
• Rotary cutter
• Cutting mat
• Measuring tape
• Pencil
• Pins
• Sewing machine
• Thread

Steps

1. Measure the seat of your golf cart. You will need to know the width and depth of the seat in order to cut your towels to the correct size.
2. Cut two pieces of fabric from each towel. You will need to cut one piece for the front of the seat and one piece for the back. The front piece should be the same width as the seat, plus 1 inch for seam allowances. The depth of the front piece should be 1 inch longer than the depth of the seat. The back piece should be the same width as the seat, plus 1 inch for seam allowances. The depth of the back piece should be 2 inches longer than the depth of the seat.
3. Sew the front and back pieces together. With right sides together, sew the front and back pieces together along the top and side edges, using a 1/2-inch seam allowance. Leave the bottom edge open.
4. Turn the seat covers right side out. Carefully turn the seat covers right side out, using a point turner or other blunt object to help push out the corners.
5. Press the seat covers. Press the seat covers flat, making sure to press the seams open.
6. Fold the bottom edge of the seat covers up 1 inch and press. Fold the bottom edge of the seat covers up 1 inch and press.
7. Topstitch the bottom edge of the seat covers. Topstitch the bottom edge of the seat covers to secure the fold.
8. Add ties to the seat covers. Cut two 12-inch pieces of ribbon. Fold each piece of ribbon in half lengthwise and press. Pin the folded ends of the ribbons to the front of the seat covers, 1 inch in from the side edges and 1 inch down from the top edge. Stitch the ribbons in place.

9. Enjoy your new golf cart seat covers! Your golf cart seat covers are now finished and ready to use. They will protect your seats from dirt, water, and sun damage.

Materials

• 2 bath towels
• Fabric scissors
• Sewing machine and thread
• Iron and ironing board
• Safety pins

Instructions

1. Cut the towels. You will need to cut each towel in half lengthwise.
2. Sew the towels together. With right sides together, sew the two halves of each towel together along the long edges. Leave a 1-inch seam allowance.
3. Turn the covers right side out. Carefully turn the covers right side out, using a point turner or other blunt object to help push out the corners.
4. Press the covers. Press the covers flat, making sure to press the seams open.
5. Hem the edges of the covers. Fold the raw edges of the covers 1/2 inch inward and press. Fold them again 1/2 inch inward and press. Stitch the hems in place.
6. Add safety pins. Add safety pins to the inside of the covers to keep them in place.

Tips and Tricks

• To make the covers more durable, you can use a heavier weight towel or add a layer of batting to the inside of the covers.
• If you want the covers to be more fitted, you can taper the hems so that they are narrower at the bottom.
• You can also add decorative stitching or appliqus to the covers to personalize them.

FAQs

• Q: Can I use any type of towel to make golf cart seat covers?

A: Yes, you can use any type of towel as long as it is a sturdy material that will hold up well to wear and tear.

• Q: How do I keep the covers from slipping off the golf cart seats?

A: You can add safety pins to the inside of the covers to keep them in place. You can also sew Velcro tabs to the covers and the seats.

• Q: Can I make golf cart seat covers for other types of vehicles?

A: Yes, you can use the same instructions to make golf cart seat covers for other types of vehicles, such as ATVs, UTVs, and golf carts.

Making your own golf cart seat covers is a great way to personalize your golf cart and protect your seats from the elements. With a few simple materials and instructions, you can have a new set of seat covers in no time.

How to Make Golf Cart Seat Covers Out Of Towels?

Q: What materials do I need?

A: You will need:

• 2 bath towels
• 1 roll of duct tape
• Fabric scissors
• Measuring tape
• Pencil

Q: How do I make the covers?

A: 1. Lay one towel flat on a work surface.
2. Measure the width and length of the seat you want to cover.
3. Cut the towel to the desired size, adding 1 inch for seam allowances.
4. Fold the towel in half lengthwise, wrong sides together.
5. Press the foldline.
6. Stitch the foldline using a 1/2-inch seam allowance.
7. Turn the towel right side out.
8. Repeat steps 4-7 for the second towel.
9. Place the two towels right sides together.
10. Stitch around the perimeter of the towels, leaving a 3-inch opening for turning.
11. Turn the covers right side out.
12. Press the covers.
13. Fold the 3-inch opening over to the inside and stitch it closed.
14. Apply duct tape to the inside of the covers to prevent them from slipping.

Q: How do I install the covers?

A: 1. Place the covers over the seats of your golf cart.
2. Pull the covers tight and tuck the excess fabric under the seats.
3. Secure the covers in place with duct tape or Velcro.

Q: How can I make the covers more durable?

A: You can make the covers more durable by:

• Using heavy-duty towels
• Applying a waterproofing spray to the covers
• Sewing the covers with a strong thread
• Using a high-quality duct tape

Q: How can I make the covers more stylish?

A: You can make the covers more stylish by:

• Using patterned towels
• Adding trim to the edges of the covers
• Embroidering your initials on the covers

Q: How can I care for the covers?

A: To care for the covers, you can:

• Machine wash them in cold water on the gentle cycle
• Tumble dry them on low heat
• Iron them on the low setting

Q: How long will the covers last?

A: The covers will last for a long time if you take care of them properly. They should last for at least a few years.

In this blog post, we have discussed how to make golf cart seat covers out of towels. We have provided a step-by-step guide, as well as tips and tricks to help you create your own custom covers. We hope that you have found this information helpful, and that you will be able to create your own stylish and functional golf cart seat covers.

Here are some key takeaways from the blog post:

• Golf cart seat covers can be made out of old towels, which is a great way to recycle old towels and save money.
• To make golf cart seat covers, you will need towels, scissors, a sewing machine, and thread.
• The steps to make golf cart seat covers are as follows:

1. Cut the towels to the desired size.
2. Sew the towels together along the edges.
3. Turn the covers right side out.
4. Add any desired embellishments, such as piping or buttons.

• Golf cart seat covers can be customized to fit any type of golf cart.
• Golf cart seat covers can protect your seats from wear and tear, and can also add a stylish touch to your golf cart.